UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended January 31, 2022

OR

For the transition period from                     to                    

Commission File Number: 001-35667

AMBARELLA, INC.

(Exact name of registrant as specified in its charter)

Registrant’s telephone number, including area code: (408) 734-8888

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:

None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.   Yes  ☒    NO  ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.   YES  ☐   No  ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months and (2) has been subject to such filing requirements for the past 90 days.   Yes  ☒   NO  ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).   Yes  ☒   NO  ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report.  ☒

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).   YES  ☐   NO  ☒

The aggregate market value of the voting and non-voting ordinary shares held by non-affiliates of the Registrant as of July 31, 2021, was approximately $2.8 billion based upon the closing price reported for such date on the NASDAQ Global Market. For purposes of this disclosure, ordinary shares held by persons known to the Registrant (based on information provided by such persons and/or the most recent schedule 13Gs filed by such persons) to beneficially own more than 5% of the Registrant’s ordinary shares and ordinary shares held by officers and directors of the Registrant have been excluded because such persons may be deemed to be affiliates. This determination is not necessarily a conclusive determination for other purposes.

Number of ordinary shares, $0.00045 par value, outstanding as of March 24, 2022: 38,065,304 shares.

DOCUMENTS INCORPORATED BY REFERENCE

TABLE OF CONTENTS

2

FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K contains forward-looking statements within the meaning of Section 27A of the Securities Act and Section 21E of the Exchange Act. The forward-looking statements are contained principally in, but not limited to, the sections titled “Business,” “Risk Factors,” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” as well as elsewhere in this Annual Report on Form 10-K. Forward-looking statements are identified by the use of the words “would,” “could,” “will,” “may,” “expect,” “believe,” “should,” “anticipate,” “outlook,” “if,” “future,” “intend,” “plan,” “estimate,” “predict,” “potential,” “target,” “seek,” “continue,” “foreseeable” or “forecast” and similar words and phrases, including the negatives of these terms, or other variations of these terms, that denote future events. Forward-looking statements include, but are not limited to, information concerning our possible or assumed future results of operations, competitive position, industry environment, potential growth opportunities and the effects of competition, our product development strategy and areas of focus, our market opportunity, our ability to develop new solutions, including our ability to integrate and apply acquired technologies to our solutions, our future financial and operating performance, sales and marketing strategy, investment strategy and the results of our investments, research and development, customer and supplier relationships, inventory levels, customer demand and our ability to secure design wins, industry trends, our cash needs and capital requirements, and expectations about seasonality, taxes, and operating expenses. These statements reflect our current views with respect to future events and our potential financial performance and are subject to risks and uncertainties that could cause our actual results and financial position to differ materially and adversely from what is projected or implied in any forward-looking statements included in this Annual Report on Form 10-K.

Factors that could affect such forward-looking statements include, but are not limited to, risks associated with revenue being generated from new customers or design wins, neither of which is assured; our ability to retain and expand customer relationships and to achieve design wins; the potential impact of the COVID-19 pandemic on our operations or the operations of our supply chain or our customers; our ability to timely produce sufficient quantities of our products on a cost-effective basis through our third-party vendors; the commercial success of our customers’ products; our growth strategy; our ability to anticipate future market demands and future needs and preferences of our customers; our ability to introduce new and enhanced solutions, including our ability to license software modules; the expansion of our current markets and our ability to successfully enter new markets; anticipated trends and challenges, including competition, in the markets in which we operate; our expectations regarding the adoption of computer vision technology; economic and geopolitical factors beyond our control; our ability to effectively generate and manage growth; our ability to retain key employees; the potential for intellectual property disputes or other litigation; the risks described under Item 1A of Part I—“Risk Factors,” Item 7 of Part II—“Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and elsewhere in this Annual Report on Form 10-K; and those discussed in other documents we file with the Securities and Exchange Commission. You are cautioned not to place undue reliance on the forward-looking statements, which speak only as of the date of this Annual Report on Form 10-K. We have no obligation (and expressly disclaim any such obligation) to update or alter any forward-looking statements, whether as a result of new information or otherwise except as otherwise required by securities regulations.

For purposes of this Annual Report, the terms “Ambarella”, “the Company”, “we”, “us” and “our” refer to Ambarella, Inc. and its consolidated subsidiaries.

3

PART I

Overview

Ambarella is a leading developer of low-power system-on-a-chip, or SoC, semiconductors providing powerful artificial intelligence, or AI, processing, advanced image signal processing and high-resolution video compression. Our technologies make cameras smarter, enabling features such as person detection, object classification, and analytics, in addition to performing complex data analysis in real time, delivering high quality imagery, and preserving vital system resources such as power and network bandwidth. We specialize in the development of deployable, scalable designs for intelligent cameras, offering a proven path to mass production.

Incorporated in 2004, we have primarily served human-viewing applications with video and image processors for enterprise, public infrastructure and home applications, such as internet protocol, or IP, security cameras, sports cameras, wearables, aerial drones, and aftermarket automotive video recorders. We are now leveraging our human-viewing heritage to pursue the machine sensing market. Our recent development efforts have focused on creating advanced AI technology that enables edge devices to visually perceive the environment and make decisions based on the data collected from cameras and, most recently, other types of sensors. This category of AI technology is known as computer vision, or CV, and our CV SoCs integrate our state-of-the-art video processor technology together with our recently developed deep learning neural network processing technology, which we refer to as CVflow®. The CVflow-architecture supports a variety of computer vision algorithms, including, object detection, classification and tracking, semantic and instance segmentation, image processing, stereo object detection, terrain mapping, and face recognition. In addition, CVflow can process other sensor modalities, including lidar, radar, time of flight, thermal and near infrared (NIR), and allows customers to differentiate their products by porting their own or third party neural networks and/or classical computer vision algorithms to our CVflow-based SoCs.  Our CV technology is creating opportunities for us to address a broader range of markets and applications while also allowing us to capture more content per electronic system.    

In November 2021, we completed our acquisition of Oculii Corp., a developer of high definition radar technology. Oculii’s adaptive AI software algorithms are designed to enable radar perception using current production radar chips to achieve significantly higher resolution, longer range and greater accuracy. Oculii’s software can be deployed on our existing CVflow SoCs, operating in conjunction with leading radar RF solutions to significantly increase safety and reliability.

In January 2022, we introduced our new CV3 AI central domain controller family of SoCs.  CV3 is specifically architected for automated driving applications.  In addition to offering our existing advanced camera perception processing, CV3 adds sensor fusion and planning layers that enable a broader set of fully automated devices.

As described below, Ambarella’s products are now used in a wide variety of human viewing and computer vision applications, including  a variety of automotive camera systems, video security cameras, mobile and fixed robots and industrial applications, and consumer devices, such as action, drone and 360° cameras.  For our fiscal years ended January 31, 2022, 2021and 2020, we recorded revenue of $331.9 million, $223.0 million and $228.7 million, respectively. For the fiscal years ended January 31, 2022, 2021 and 2020, we incurred net losses of $26.4 million, $59.8 million and $44.8 million, respectively. We have generated cash from operations in each fiscal year starting from 2009.

Industry Background and Target Markets

Computer vision functionality has historically been executed with graphics processing units (GPU), field programmable gate-arrays (FPGA) or general purpose microprocessors (CPU) in servers or datacenters.  This approach requires large amounts of data to be transported from an end-point electronic system or device into the network infrastructure, where the data may be stored, processed, and then sent back to the end point, creating added delay, power consumption and incremental expense from data communications, server processing and storage.  In some applications, unacceptable levels of latency are introduced by the transportation of this data, minimizing or, in some cases, eliminating the utility of the product. In addition, this approach often requires personal information to be transmitted from the end-point device to the network infrastructure, potentially raising privacy and security concerns.

4

We believe the CV end-point market, sometimes referred to as the system’s edge, requires a fundamentally different SoC architecture versus the GPU, FPGA and CPU approach commonly utilized in the datacenter.  Our CV SoCs are optimized for the requirements of the end-point market to provide highly accurate results, significant processing power, small form factor and minimal latency while consuming very low amounts of power and simultaneously delivering both human viewing and computer vision functionality, often while supporting multiple cameras and multiple AI applications with a single SoC incorporated in an end-point device.  In addition, privacy and security can be enhanced, as critical personal information may not need to enter the network infrastructure.    

Our first CV SoC was introduced in 2018 and CV3 is our third generation computer vision SoC family. Our development efforts are now focused on SoCs that provide both human viewing and computer vision functionality.  With the acquisition of Oculii, we also now complement our advanced camera perception capabilities with advanced radar perception to enable higher levels of autonomy.  

We are focusing on the automotive and Internet-of-Things (IoT) end markets:  

5

6

Our Competitive Strengths

Our platform technology solutions provide performance attributes that satisfy the stringent demands of the camera market, enable integration of HD video and image capture capabilities in portable devices, and provide computer vision capabilities that address the evolving needs of the automotive and IoT markets. We believe that our leadership is the result of our competitive strengths, including:

7

Products

We have a wide range of products in our portfolio, including products that have commercially shipped, products for which we have shipped engineering samples and products that are under development. We typically introduce two to three new silicon products per year which, when combined with our flexible software development kits, allow us to offer product families addressing the specific needs of a wide range of end markets. In addition to enabling small device size and low power consumption, our SoC solutions make possible differentiated functionalities, such as computer vision functionality, simultaneous video and image capture, multiple-stream video capture, image stabilization and wireless connectivity.

Central Domain Controller. Our new CV3 central domain controller family offers significantly higher levels of processing performance than our prior solutions, allowing us to provide the incremental processing power to execute the complex software stack required for higher levels of autonomy. This scalable, power-efficient CVflow family of SoCs provides AI processing performance of up to 500 eTOPS. Featuring up to 16 Arm® CPU cores, the CV3 provides up to a 30x boost in CPU performance over our prior generations in support of autonomous vehicle software applications. The CV3 family enables centralized, single-chip processing for multi-sensor perception, including high-resolution vision, radar, ultrasonic and lidar, as well as deep fusion for multiple sensor modalities and AV path planning.  The central domain controller in autonomous vehicles is connected to the camera, radar and other sensor suites. Using neural network and traditional computer vision processing, the domain controller fuses the sensor data and perceives the vehicle’s surroundings. Based on this multi-sensor surround perception, the domain controller estimates a safe driving path for the vehicle. In addition, the domain controller can simultaneously process in-cabin sensing applications, including driver and occupant monitoring. The CV3 family of products also supports zonal AI domain controllers and edge AI processors for front ADAS systems.

CVflow SoCs. Our AI architecture, incorporated into our CV family of SoCs, extracts and processes data from video streams, enabling our customers to develop intelligent camera systems.  These SoCs combine advanced image processing, high-resolution video encoding and CVflow AI processing in a single, low-power design to enable a new class of smart edge devices for applications including smart home security, retail monitoring, consumer robotics, and occupancy monitoring.

Vision Processor SoCs. Our video and image processing SoCs, based on our proprietary architecture, integrate an advanced image sensor pipeline (ISP), H.264 and/or H.265 encoders, and a powerful ARM CPU for advanced analytics, flight control, WiFi streaming, and other user applications.  Our unique architecture and advanced process node technology lowers power consumption while maintaining high performance for security camera and consumer applications such as connected drones, sports cameras, and 360º (VR) cameras.  

High Definition Radar.  Through our acquisition of Oculii, we offer adaptive AI software algorithms designed to enable radar perception using current production radar chips to achieve significantly higher resolution, longer range and greater accuracy. These improvements eliminate the need for specialized high-resolution radar chips, which have significantly higher power consumption and cost than conventional radar solutions. Oculii’s software can be deployed on Ambarella’s existing CVflow SoCs, operating in conjunction with leading radar RF solutions to increase safety and reliability.

Serializer/Deserializers.  Our B6 and B8 SerDes (Serializer/Deserializer) products are mixed-signal (analog and digital) semiconductors used to transport data short distances (up to 10 meters) from a CMOS image sensor, often in a remote camera location, to our video and CV SoCs.  The SerDes chips are used to add additional camera(s) to an automotive application, as well as used as a bridge chip for other automotive applications, such as MIPI combiner, splitter and display drivers.  Our SerDes chips are also used in security applications, for example, ATMs may use a single B6 chip for connecting multiple remote cameras to a single video processor SoC.

8

Software Modules.  In the future, we may separately license proprietary software modules that can be used in conjunction with a customer’s internally developed software and/or with third-party software.  Features that may be licensed include functionality for a variety of automotive applications, including dataloggers, front-facing ADAS systems, eMirrors and in-cabin applications.

The chart below describes our current product lines:

Technology

Our semiconductor processing solutions enable artificial intelligence and computer vision processing, HD, UHD and 8K UHD (up to 7680 x 4320p60) video and image processing, and video compression, sharing and display while offering exceptional power, size, and performance characteristics.

9

Key differentiators of our technology include:

10

Our technology platform is based on a high-performance, low-power architecture supported by a high level of system integration. The building blocks of our platform are illustrated below:

Our technology platform enables the capture of high-resolution still images and UHD video while simultaneously performing CV processing and encoding for high-quality storage and lower resolution real time streaming.

CVflow

Our proprietary AI computer vision processing architecture, known as CVflow™, uses a flexible hardware engine programmed with a data flow graph algorithm description to achieve increased performance while minimizing die size and power consumption. This description allows the hardware to maximize use of its resources by exploiting all available parallelism without software intervention.  The CVflow architecture specifies data flow connections between a set of optimized AI and computer vision operators, such as the convolution and matrix multiply functions that are used for deep learning algorithms. The CVflow architecture also supports a variety of other algorithms, including radar processing, stereo obstacle detection and sensor fusion.  Our platform allows customers to differentiate their products by porting and optimizing their own algorithms and neural networks to our CVflow-based chips from industry-standard training tools and APIs.

Computer Vision and Radar Technology

11

Computer vision is a core technology that complements our proprietary image processing and video compression technology. We have developed efficient deep learning algorithms for object detection and segmentation leveraging our deep understanding of the CVflow processor. A significant feature of our CV SoCs is support for HD stereo and HD radar based depth sensing. We believe HD stereo and HD radar are complementary sensor modalities that provide robust depth information after fusion.  This depth information provides an important augmentation to monocular computer vision processing, resulting in an extra margin of safety for autonomous driving and other applications. Monocular processing depends on training to detect obstacles, and may not detect obstacles that are not represented in the training set. Stereo cameras and radar detect obstacles without relying on training for specific obstacle categories because the depth information is used to directly construct a three-dimensional model of the camera’s surroundings, including any obstacles. This allows more robust decisions to be made in applications such as autonomous driving.

Compatible Family of SoC Solutions

Our current SoC designs integrate our fully-programmable and highly-efficient CVflow architecture, UHD image processing and video compression, applications processing and system functions onto a single chip, delivering exceptional performance, quality and power efficiency with differentiated features. Our multi-core DSP architecture is highly scalable and balances software programmability with hardware-accelerated performance to achieve extremely low power consumption and maximized camera battery life. We have used this scalability to develop an extensive family of software compatible SoCs with a wide range of performance and price points (CV28, CV25, CV22, CV2, CV2FS, and CV5). This scalable, programmable architecture provides our customers with the flexibility they need to quickly develop a wide range of differentiated products. Additionally, our SoCs integrate mixed signal (analog/digital) functionality and high speed interfaces required for interfacing to advanced high-speed CMOS sensors and industry standard interfaces such as PCI-E, USB 3.2 and HDMI 2.0.  Our next generation CV3 family extends our CVflow architecture to cover L2+/L3/L4 autonomous driving and other high performance safety critical applications. The CV3 family will cover multiple performance and price points as we have done with the CV2 family with a software compatible SDK.

Software Development Kits

We provide to our customers fully-functional software development kits with a suite of APIs which allow customers to rapidly integrate our solution, adjust product specifications and provide additional functionality to their systems, thereby enabling them to differentiate their product offerings and reduce time to market. We have software development kits for all of our core markets.  

We also provide a toolkit to accelerate the development of computer vision algorithms onto our hardware. We provide tools to map and optimize algorithms developed in commonly used computer vision frameworks such as PyTorch or TensorFlow into our proprietary CVflow architecture. We also provide a framework for development of higher-level computer vision tasks.  This enables our customers to write complex computer vision algorithms with multiple tasks running in parallel on multiple processing engines, as would be required in applications such as autonomous driving.

Software Modules

We are developing optimized software modules to give customers the option to leverage our expertise and reduce development time and expense.  These modules include HD radar processing for standalone and central radar processing, DL based low light and HDR image processing, monocular and stereo camera perception, and autonomous driving stack modules optimized for the CV3 family, including fusion for multiple cameras and sensor modalities, mapping and localization algorithms and planning.

AmbaClear

12

Our proprietary image signal processing architecture, known as AmbaClear, incorporates advanced algorithms to convert raw sensor data to UHD video and/or still images. Image processing algorithms include sensor, lens and color correction, HDR tone mapping, color processing and de-mosaicing to reconstruct a full color image from incomplete color samples and specialized color filters, noise filtering, detail enhancement and image format conversion. For example, raw sensor data can be captured at up to 32-megapixel (8K) resolution at 60 frames per second. This image processing reduces noise in the sensor data and improves color, contrast and sharpness resulting in improved computer vision performance, enhanced human viewing and enhanced storage and transmission efficiencies. Our WDR and HDR processing capabilities handle greater dynamic range between the lightest and darkest areas of an image, permitting video images to reveal details that would otherwise be lost against a bright background. We have developed efficient scalable deep learning algorithms for advanced low light processing and HDR tone mapping that augment our image processing hardware. These algorithms provide significant image quality improvements over our standard image processing while running in real time at HD and higher resolutions. Our advanced de-warping capability enables cameras to use wide angle lenses to capture images from a wide area, making it ideal for a variety of IP security camera and surround view applications. Our RGB- infrared fusion capability allows a single sensor to produce simultaneous RGB and infrared images for sensing and improved low light performance.

AmbaCast

Our proprietary UHD video compression architecture, known as AmbaCast, incorporates advanced algorithms for motion estimation, motion-compensated 3D temporal filtering, mode decision and AI based rate control. Successful implementation of these computationally intensive steps has helped us maximize compression efficiency. We support H.264 and H.265 video compression standard with our H.265 providing up to 2x better compression efficiency compared to our H.264 video compression technology.

Design Methodology

The success of our technology platform stems from our algorithm driven design methodology. We do extensive algorithm studies in deep learning AI, image processing and compression including our internally developed and public external algorithms. We use these studies to develop high power and die area efficient processing engines compared with general purpose processors like CPUs and GPUs.  We also include a high degree of programmability to provide flexibility in supporting new algorithms that we and our customers develop. We test and verify our algorithms on our proprietary architectural model prior to implementing our processor engines in hardware. Our advanced verification methodology validates our approach through simultaneous modeling of architecture, algorithms, and the hardware itself. This redundant approach enables us to identify and remediate any weaknesses early in the development cycle, providing a solid foundation on which we build our hardware implementation, and enhances our ability to achieve first-pass silicon success. We possess extensive expertise in AI deep learning, video and imaging algorithms, as well as deep sub-micron digital and mixed-signal design experience.

Customers

We sell our solutions to leading original design manufacturers, or ODMs, and original equipment manufacturers, or OEMs, globally. In the automotive OEM market, we may sell our solutions to Tier-1 suppliers that develop and sell devices incorporating our solutions to automotive OEMs. We refer to ODMs and Tier-1 suppliers as our customers and OEMs as our end customers, except as otherwise indicated or as the context otherwise requires.  

Sales to customers in Asia accounted for approximately 88%, 88%, and 90% of our total revenue in the fiscal years ended January 31, 2022, 2021, and 2020, respectively. As many of our OEM end customers or their ODM manufacturers are located in Asia, we anticipate that a majority of our revenue will continue to come from sales to customers in that region. Although a large percentage of our sales are made to customers in Asia, we believe that a significant number of the products designed by these customers and incorporating our SoCs are then sold to consumers globally. To date, all of our sales have been denominated in U.S. dollars.

We work closely with our end customer OEMs and ODMs throughout their product design cycles that often last nine to eighteen months for many of our target markets, although new products may have longer design cycles, particularly those implementing advanced AI features.  Product design cycles for certain portions of the automotive market generally last longer than eighteen months, particularly for products containing user safety features.  As a result, we are able to develop long-term relationships with our customers as our technology becomes embedded in their products. Consequently, we believe we are well positioned to not only be designed into our customers’ current products, but also to continually develop next-generation HD video and image processing solutions for their future products.

13

The product life cycles in many of our target markets typically range from twelve to 24 months. We expect that product lifecycles in the automotive OEM and the industrial and robotics markets will typically be longer than 24 months, as new product introductions occur less frequently. For many of our solutions, early engagement with our customers’ technical staff is necessary for success.

In fiscal year 2022, the customers representing 10% or more of revenue were Wintech Microelectronics Co., Ltd., or Wintech, our Asia-based distributor, and Chicony Electronics Co., Ltd., or Chicony, a direct ODM customer that manufactures products for multiple end-customers, which accounted for approximately 62% and 13% of total revenue, respectively. We currently rely, and expect to continue to rely, on a limited number of customers for a significant portion of our revenue.

Sales and Marketing

We sell our solutions worldwide using our direct sales force and our distributors. We have direct sales personnel covering the United States, Asia and Europe, and we operate sales offices in Santa Clara, California and Hong Kong, and business development offices in China, Germany, Japan, South Korea, and Taiwan. In addition, in each of these locations we employ a staff of field applications engineers to provide direct engineering support locally to our customers.  

Our sales cycles typically require a significant investment of time and a substantial expenditure of resources before we can realize revenue from the sale of our solutions, if any. Our typical sales cycle consists of a multi-month sales and development process involving our customers’ system designers and management and our sales personnel and software engineers. If successful, this process culminates in a customer’s decision to use our solutions in its system, which we refer to as a design win. Our sales efforts are typically directed to the OEM of the product that will incorporate our computer vision and video and image processing solution, but the eventual design and incorporation of our SoC into the product may be handled by an ODM or Tier-1 supplier on behalf of the OEM. Volume production may begin within nine to 18 months after a design win, depending on the complexity of our customer’s product and other factors upon which we may have little or no influence. Once our solutions have been incorporated into a customer’s design, they are likely to be used for the life cycle of the customer’s product. Conversely, a design loss to a competitor will likely preclude any opportunity for future revenue from such customer’s product.  

Our sales are generally made pursuant to purchase orders received approximately four to 30 weeks prior to the scheduled product delivery date, depending upon agreed terms with our customers and the current manufacturing lead time at the time the purchase order is received. These purchase orders may be cancelled without charge upon notification within an agreed period of time in advance of the delivery date, which may be as short as 30 days. Our standard warranty provides that our SoCs containing defects in materials, workmanship or performance may be returned for a refund of the purchase price or for replacement, at our discretion. We may agree to different warranty terms with specific customers from time to time.  

Our sales are primarily made through standard purchase orders for delivery of products. Our manufacturing production is based on estimates and advance non-binding commitments from customers as to future purchases. We follow industry practice that allows customers to cancel, change or defer orders with limited advance notice prior to shipment. Given this practice, we do not believe that backlog is a reliable indicator of future revenue levels.  

Manufacturing

We employ a fabless business model and use third-party foundries and assembly and test contractors to manufacture, assemble and test our solutions. This outsourced manufacturing approach allows us to focus our resources on the design, sales and marketing of our solutions and avoid the cost associated with owning and operating our own manufacturing facility. Our engineers work closely with foundries and other contractors to increase yields, lower manufacturing costs and improve quality. In addition, we believe outsourcing many of our manufacturing and assembly activities provides us the flexibility needed to respond to new market opportunities, simplifies our operations and significantly reduces our capital requirements. We do not have a guaranteed level of production capacity from any of our suppliers’ facilities to produce our solutions. We carefully qualify each of our suppliers and their subcontractors and processes in order to meet the extremely high-quality and reliability standards required of our solutions.

14

Wafer Fabrication

We have a history of using several process nodes from 130 nm through 5 nm. We aim to use the most advanced manufacturing process technology appropriate for our products that is available from our third-party foundries. As a result, we periodically evaluate the benefits of migrating our solutions to smaller geometry process technologies in order to improve performance and reduce costs. We believe this strategy will help us remain competitive. While we currently manufacture the majority of our solutions in the 28 nm, 14 nm and 10 nm process nodes, our most recent products are manufactured in the 5 nm process node. Currently, the substantial majority of our SoCs are supplied by Samsung in facilities located in Austin, Texas and South Korea, from whom we have the option to purchase both fully-assembled and tested products as well as tested die in wafer form for assembly. We also have products supplied by GlobalFoundries Inc.  

Assembly and Testing

Samsung subcontracts the assembly and initial testing of the assembled chips it supplies to us to Signetics Corporation and STATS ChipPAC Ltd. In the case of purchases of tested die from Samsung, we contract the assembly to Advanced Semiconductor Engineering, Inc., or ASE. We contract the assembly of products supplied by Global Foundries Inc. to ASE.  Final testing of all of our products is handled by King Yuan Electronics Co., Ltd. or Sigurd Corporation under the supervision of our engineers. All test software and related processes for our products are developed by our engineers. We continually monitor the results of testing at all of our test contractors to ensure that our testing procedures are properly implemented.

As part of our total quality assurance program, our quality management system has been certified to ISO 9001:2015 standards. Our foundry vendors are also ISO 9001 certified.  

Due to the scheduling requirements of our foundry, assembly and test contractors, we generally provide our contractors with our production forecasts and place firm orders for products with our suppliers up to 36 weeks prior to the anticipated delivery date, or potentially longer during times of acute capacity shortages, usually without a purchase order from our own customers.

Research and Development  

We believe our technology is a competitive advantage and we engage in substantial research and development efforts to develop new products and integrate AI computer vision capabilities into our HD and UHD video processing solutions. We believe that our continued success depends on our ability to both introduce improved versions of our existing solutions and to develop new solutions for the markets that we serve. As of January 31, 2022, 75% of our employees are engaged in research and development. Our research and development team is comprised of both semiconductor and software designers. Our semiconductor design team has extensive experience in large-scale semiconductor design, including architecture description, logic and circuit design, implementation and verification. Our software design team has extensive experience in development and verification of software for the HD video market. Because the integration of hardware and software is a key competitive advantage of our solutions, our hardware and software design teams work closely together throughout the product development process. The experience of our hardware and software design teams enables us to effectively assess tradeoffs and advantages when determining which features and capabilities of our solutions should be implemented in hardware and in software.

We have assembled a core team of experienced engineers and systems designers in four research and development design centers located in the United States, China, Italy, and Taiwan.

Competition

The global semiconductor market in general, and the AI and video and image processing markets in particular, are highly competitive. We expect competition to increase and intensify as more and larger semiconductor companies enter our markets and as we penetrate new markets, such as the automotive OEM market. Increased competition could result in price pressure, reduced profitability and loss of market share, any of which could materially and adversely affect our business, revenue and operating results.

Our competitors range from large, international companies offering a wide range of semiconductor products to smaller companies specializing in narrow markets. In the IoT market, our primary competitors include AMLogic Inc., Fuzhou Rockchip Electronics Co., Ltd., HiSilicon Technologies Co., Ltd., or HiSilicon, which is owned by Huawei Technologies Co., Ingenic Semiconductor Co., Ltd., Novatek Microelectronics Corp., or Novatek, NVIDIA Corporation, or NVIDIA, OmniVision Technologies, Inc., Qualcomm Incorporated, or Qualcomm, SigmaStar Technology Corp., and Socionext Inc. In the automotive camera market, we compete against Allwinner Technology Co., Ltd., Horizon Robotics Inc., iCatch Technology, Inc., Mobileye, a subsidiary of Intel Corporation, Novatek, NVIDIA, NXP Semiconductors N.V., Qualcomm, Renesas Electronics Corporation, and Texas Instruments. Certain of our customers and suppliers also have divisions that produce products competitive with ours.

15

Our ability to compete successfully depends on elements both within and outside of our control, including industry and general economic trends. Many of our competitors are substantially larger, have greater financial, technical, marketing, distribution, customer support and other resources, are more established than we are, and have significantly better brand recognition and broader product offerings which may enable them to develop and enable new technology into product solutions better or faster than us and to better withstand adverse economic or market conditions in the future.

Our ability to compete successfully in the rapidly evolving camera markets depends on several factors, including:  

We believe we compete favorably with respect to these factors, particularly because our solutions typically provide high-performance and low power consumption video, CNN performance, efficient integration of our advanced algorithms, exceptional storage and transmission efficiencies at lower power, highly-integrated SoC solutions based on a scalable platform, and comprehensive and flexible software. We cannot ensure, however, that our solutions will continue to compete favorably or that we will be successful in the face of increasing competition from new products introduced by existing or new competitors.

Intellectual Property  

We rely on a combination of intellectual property rights, including patents, trade secrets, copyrights and trademarks, and contractual protections, to protect our core technology and intellectual property. As of January 31, 2022, we had 266 issued patents in the United States, 99 of which were continuation or divisional patents, 10 issued patents in Europe, 7 issued patents in China, 6 issued patents in Japan and 80 pending patent applications in the United States. The issued patents in the United States expire beginning in 2024 through 2040. Many of our issued patents and pending patent applications relate to image and video processing and HD video compression, AI processing, system level camera, and radar perception applications spanning multiple market segments.  

We may not receive competitive advantages from any rights granted under our patents, and our patent applications may not result in the issuance of any new patents. In addition, any patent we hold may be opposed, contested, circumvented, designed around by a third party or found to be unenforceable or invalidated. Others may develop technologies that are similar or superior to our proprietary technologies, duplicate our proprietary technologies or design around patents owned or licensed by us.

In addition to our own intellectual property, we also use third-party licenses for certain technologies embedded in our SoC solutions. These are typically non-exclusive contracts provided under royalty-accruing or paid-up licenses. These licenses are generally perpetual or automatically renewed for so long as we continue to pay any maintenance fees that may be due. To date, maintenance fees have not constituted a significant portion of our capital expenditures. While we do not believe our business is dependent to any significant degree on any individual third-party license, we expect to continue to use and may license additional third-party technology for our solutions.

We generally control access to and use of our confidential information through employing internal and external controls, including contractual protections with employees, contractors and customers. We rely in part on U.S. and international copyright laws to protect our mask work. All employees and consultants are required to execute confidentiality agreements in connection with their employment and consulting relationships with us. We also require them to agree to disclose and assign to us all inventions conceived or made in connection with the employment or consulting relationship.

16

Despite our efforts to protect our intellectual property, unauthorized parties may still copy or otherwise obtain and use our software, technology or other information that we regard as proprietary intellectual property. In addition, we continue to operate internationally, and effective patent, copyright, trademark and trade secret protection may not be available or may be limited in foreign countries.

Seasonality  

Our business has tended to be seasonal with higher revenue in our second and third fiscal quarters as our customers typically increase their production to meet holiday shopping season or year-end demand for their products. We also may experience seasonally lower demand in our first and fourth fiscal quarters due in part to the Asia-based portion of the security camera market as a result of industry seasonality and the impact of ODM and OEM factory closures associated with the Chinese New Year holiday. These seasonal fluctuations may diminish if our revenue diversifies and becomes less dependent on sales of our customers’ consumer products.

Governmental Regulation

Our business and operations around the world are subject to government regulation at the national, state or local level addressing, among other matters, applicable environmental laws, health and safety laws and regulations, laws relating to export controls and economic sanctions, and the rules of industrial standards bodies such as the International Standards Organization and governmental agencies such as the Federal Trade Commission.

We believe that our properties and operations comply in all material respects with applicable laws protecting the environment and worker health and safety. As a fabless semiconductor company, we do not manufacture our own products but do maintain laboratory space at certain of our facilities to facilitate the development, evaluation and testing of our SoC products. These laboratories may maintain small quantities of hazardous materials. While we believe we are in material compliance with applicable law concerning the safeguarding of these materials and with respect to other matters relating to health, safety and the environment, the risk of liability relating to hazardous conditions or materials cannot be eliminated completely. To date, we have not incurred significant expenditures relating to environmental compliance at our facilities nor have we experienced any material issues relating to employee health and safety.

In addition to environmental and worker health and safety laws, our business is subject to various rules and regulations and executive orders relating to export controls and trade sanctions. Certain of our products are subject to the Export Administration Regulations (EAR), which are administered by the United States Department of Commerce’s Bureau of Industry and Security (BIS), and we may from time to time be required to obtain an export license before we can export certain products or technology to specified countries or customers. In addition, the EAR imposes broad controls on entities listed on sanctioned persons lists, including the BIS Entity List. If one of our customers is listed on the BIS Entity List or another U.S. government sanctioned persons’ list, then subject to certain exceptions, we will, as a general rule, be precluded from doing business with that customer. For example, certain of our Chinese customers, or their affiliated entities, have been added to the BIS Entity List in the last couple of years, which limits our ability to ship certain products to these customers. We cannot guarantee that export control restrictions or sanctions imposed in the future will not prevent, or materially limit, our ability to conduct business with certain customers or in certain countries. Any failure to comply with these laws could result in governmental enforcement actions, including substantial monetary penalties and denial of export privileges.

Human Capital Resources

Innovation has been the lifeblood of our company since our founding in 2004.  We have continually strived to develop leading-edge image and video, and now AI, processors using the most advanced semiconductor processes available. We depend on our people to sustain our competitive advantages.  

As of January 31, 2022, we employed a total of 899 people, including 245 in the United States, 583 in Asia, primarily in China and Taiwan, and 71 in Europe. Approximately 75% of our employees are engaged in research and development, 2% in operations, and 23% in sales, marketing, and administration. As of January 31, 2022, females represented 30% of our outside directors, 22% of senior management, 17% of our technical roles, and 21% of our total workforce. Of our total employee workforce, 39% is represented by a work council in Taiwan. The work council group, which is common in Taiwan, is comprised of employees elected by the general employee base in that location. We consider our global employee relations to be good. Despite employees working in geographically disparate locations and differences in cultures, we strive to treat all employees as part of one team working together. Our Chief Executive Officer holds quarterly town hall style meetings with employees of all of our offices to keep employees apprised of company activities and objectives and to provide an opportunity for all employees to meet and ask questions.

17

Our human capital resources objectives include attracting and retaining talented and experienced employees. We utilize multiple online search tools, specialized recruiting firms, employee referral programs and university hires to ensure a varied outreach approach for candidates. We are committed to ensuring the human rights of our worldwide workforce and treating all employees with dignity and respect. We offer a combination of competitive base salary, time-based equity incentives and bonus plans linked to financial and strategic performance that are designed to motivate and reward personnel with annual grants of stock-based and cash-based incentive compensation awards, plus other benefits, in order to increase stockholder value and the success of our company by motivating such individuals to perform to the best of their abilities and achieve both our short and long-term objectives. We offer competitive benefits tailored to local markets and laws and designed to support employee health, welfare and retirement; examples of such benefits include paid time off; 401(k), pension or other retirement plans; an employee stock purchase plan; basic and voluntary life, disability and supplemental insurance; medical, dental and vision insurance; health savings and flexible spending accounts; relocation assistance; and employee assistance programs.

The average tenure of our employees is approximately 6.8 years and approximately 27% of our employees have been employed by us for more than 10 years. We believe our compensation and benefits packages, combined with our culture that promotes teamwork, innovation and hands-on experience from the first day of employment, contribute to low employee turnover and an above-average tenure. We monitor employee turnover rates by region and our company as a whole. Our worldwide voluntary employee turnover rate in fiscal year 2022 was approximately 6.3%.

Our primary focus during the COVID-19 pandemic has been protecting the health and safety of our employees and the communities in which we operate. In our locations that have experienced consistently high rates of infection, such as the United States and Italy, employees have primarily worked remotely since March 2020, except for those few performing a small number of tasks that cannot be performed remotely. In other locations, employees have worked from home during certain periods of the pandemic as recommended by local health officials.

Corporate Information

Ambarella was founded and incorporated in the Cayman Islands in January 2004. Our registered address is PO Box 309GT, Ugland House, South Church Street, George Town, Grand Cayman, Cayman Islands. The address of our U.S. operating subsidiary is Ambarella Corporation, 3101 Jay Street, Santa Clara, California. The Securities and Exchange Commission, or SEC, maintains a website at www.sec.gov that contains reports, proxy, and information statements, and other information regarding registrants that file electronically. You may also obtain copies of our Forms 10-K, 10-Q, 8-K, and other filings with the SEC, and all amendments to these filings, free of charge, by visiting the Investor Relations page on our website (http://investor.ambarella.com) as soon as reasonably practicable following our filing of any of these reports with the SEC. Information on our website is not incorporated into this Annual Report on Form 10-K or our other securities filings and is not a part of such filings.

ITEM 1A. Risk Factors

Certain factors may have a material adverse effect on our business, financial condition and results of operations. You should consider carefully the risks and uncertainties described below, in addition to other information contained in this Annual Report on Form 10-K, including our consolidated financial statements and related notes. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties that we are unaware of, or that we currently believe are not material, may also become important factors that adversely affect our business. If any of the following risks actually occurs, our business, financial condition, results of operations, and future prospects could be materially and adversely affected. In that event, the trading price of our ordinary shares could decline, and you could lose part or all of your investment.

Summary of Risk Factors

Our business and our industry is subject to numerous risks and uncertainties, including those described in the following Risk Factors.  These risks include, but are not limited to, the following:

18

19

20

Risks Related to Our Business and Our Industry

The COVID-19 pandemic could adversely affect our business in a material way.

The global COVID-19 pandemic has significantly affected the populations and businesses of many countries. Our business has been, and is expected to continue to be, adversely impacted by the effects of the COVID-19 pandemic. In addition to global macroeconomic effects, the COVID-19 pandemic and related adverse public health developments have been causing, and are expected to continue to cause, disruption to our operations. We have had to impose remote or work from home conditions for varying periods of time in many of our offices, including the United States, China, Italy, Japan, South Korea and Taiwan. If such remote or work from home conditions continue for an extended period of time, we may experience delays in product development, a decreased ability to support our customers, reduced design win activity, and overall lack of productivity. Approximately 350 of our employees are located in Taiwan and approximately 200 employees are located in China, and lengthy closures of these offices could significantly disrupt our software engineering and customer support operations. In addition, we and our suppliers, third-party distributors and customers have been, and are expected to continue to be, disrupted by quarantines and restrictions on certain employees’ ability to perform their jobs, office closures or restrictions, disruptions to shipping infrastructure, or other travel or health-related restrictions. Depending on the magnitude of such effects on our manufacturing activities or the operations of our suppliers, third-party distributors or sub-contractors, our supply chain, manufacturing and product shipments could be delayed, which could materially adversely affect our business, results of operations and financial condition. Disruptions may also adversely affect our customers’ ability to manufacture their products, which in turn could reduce their demand for our products.

The semiconductor industry in general is currently experiencing significant shortages of capacity, due in part to COVID-19, which has resulted in a lengthening of the manufacturing lead time for our products and could be impacting the normal forecasting and ordering patterns of our customers. Moreover, if there is a significant COVID-19 outbreak that impacts Samsung Electronic Corporation’s ability to manufacture our SoCs or our third-party contractors’ ability to assemble, test and ship our products, we could experience delays or reductions in our ability to ship products to our customers. There can be no assurance that any decrease in sales resulting from the COVID-19 pandemic will be offset by increased sales in subsequent periods. These effects, alone or taken together, could have a material adverse effect on our business, results of operations, legal exposure, or financial condition. The extent of the COVID-19 pandemic’s effect on our operational and financial performance will depend on future developments, including the duration, spread and intensity of the pandemic, all of which are uncertain and difficult to predict. Due to the constantly evolving global conditions, we are not able at this time to estimate the long-term effect of these factors on our business, but the adverse impact on our business, results of operations, financial condition and cash flows could be material.

If our customers do not design our solutions into their product offerings, or if our customers’ product offerings are not commercially successful, our business would suffer.

We sell our video and image processing system-on-a-chip, or SoC, solutions to original equipment manufacturers, or OEMs, who include our SoCs in their products, and to original design manufacturers, or ODMs, who include our SoCs in the products that they supply to OEMs. We generally refer to ODMs as our customers and OEMs as our end customers, except as otherwise indicated or as the context otherwise requires. Our computer vision, video and image processing SoCs are generally incorporated into our customers’ products at the design stage, which is referred to as a design win. As a result, we rely on OEMs to design our solutions into the products that they design and sell. Without these design wins, our business would be significantly harmed. We often incur significant expenditures developing a new SoC solution without any assurance that any OEM will select our solution for design into its own product. Once an OEM designs a competitor’s device into its product, it becomes significantly more difficult for us to sell our SoC solutions to that OEM because changing suppliers involves significant cost, time, effort and risk for the OEM. We anticipate that it will take longer and require more resources and greater expenditures to achieve design wins, and likely take longer to generate revenue from such design wins in the new markets we are targeting, such as the OEM automotive and robotics markets, than our legacy camera markets. In addition, trade tensions between the United States and China and potential new export restrictions, as discussed in subsequent risk factors, may make it more difficult to secure future design wins with China customers.  

Even if an OEM designs one of our SoC solutions into its product, we cannot be assured that the OEM’s product will be commercially successful over time or at all. For example, in the past we have secured design wins for camera products that were never commercially released by our customer or did not sell in volumes initially forecast by the customer, as a result of factors beyond our control. If products incorporating our SoC solutions are not commercially successful or experience rapid decline, our revenue and business will suffer. Similarly, if an OEM designs one of our SoC solutions into its product, we are not assured that we will receive or continue to receive new design wins from that OEM, which could negatively impact our business.

21

If we fail to penetrate new markets, our revenue and financial condition could be harmed.

We believe that our future revenue growth, if any, will significantly depend on our ability to expand within the Intelligence of Things (IoT) camera markets with our new artificial intelligence, or AI, computer vision SoC solutions, and the OEM automotive, robotics and industrial markets. Each of these markets presents distinct and substantial risks and, in many cases, requires us to develop new functionality or software to address the particular requirements of that market. If any of these markets do not develop as we currently anticipate, or if the development of such markets is delayed or impacted by factors outside of our control, such as the COVID-19 pandemic, or if we are unable to penetrate them successfully with our solutions, our revenue could decline, and our financial condition would be negatively impacted. Some of these markets are primarily served by only a few large, multinational OEMs with substantial negotiating power relative to us and, in some instances, with internal solutions that are competitive to our products. Meeting the technical requirements and securing design wins with any of these companies will require a substantial investment of our time and resources and we cannot assure you that we will secure design wins from these or other companies or that we will achieve meaningful revenue from the sales of our solutions into these markets. We anticipate that as we continue to move into new markets, such as the OEM automotive, robotics and industrial markets, we will face competition from larger competitors with greater resources and more history in these markets. If we fail to penetrate these or other new markets we are targeting, our financial condition would likely suffer.  Moreover, if we are successful in achieving design wins in these new markets, it will likely take longer to generate revenue from such design wins than in our current markets.

If we fail to develop and introduce new or enhanced solutions on a timely basis, our ability to attract and retain customers could be impaired and our competitive position could be harmed.

We operate in a dynamic environment characterized by rapidly changing technologies. To compete successfully, we must design, develop, market and sell enhanced solutions that provide increasingly higher levels of performance and functionality and that meet the technical and cost expectations of our customers. Our existing or future solutions could be rendered obsolete by the introduction of new products by our competitors; convergence of other markets with or into the camera market; the market adoption of products based on new or alternative technologies; the emergence of new industry standards applicable to our solutions; or the requirement of additional functionality included in video processors. In addition, some of the markets for our solutions are characterized by frequent introduction of next-generation and new products, short product life cycles, increasing demand for added functionality and significant price competition. As we develop and introduce new solutions, we face the risk that customers may not value or be willing to bear the cost of incorporating these newer solutions into their products, particularly if they believe their customers are satisfied with current solutions. Regardless of the improved features or superior performance of the newer solutions, customers may be unwilling to adopt our new solutions due to design or pricing constraints. If we or our customers are unable to manage product transitions in a timely and cost-effective manner, our business and results of operations would suffer.  

Our failure to anticipate or timely develop new or enhanced solutions in response to technological shifts could result in decreased revenue and our competitors achieving design wins that we sought. In particular, we may experience difficulties with product design, development of new software, manufacturing, marketing or qualification that could delay or prevent our development, introduction or marketing of new or enhanced solutions. In addition, for some markets, such as the automotive OEM market, we need to establish and maintain relationships with third-party suppliers or software providers in order to effectively market our solutions to end-customers. Failure to establish these relationships could harm our ability to achieve design wins. Delays in product development could impair our relationships with our customers and negatively impact sales of our solutions under development. If we fail to introduce new or enhanced solutions that meet the needs of our customers or penetrate new markets in a timely fashion, we will lose market share, and our operating results will be adversely affected.

Shortages in, or increased costs of, wafers and materials could adversely impact our gross margins and lead to reduced revenues.

Worldwide manufacturing capacity for silicon wafers is relatively inelastic. If the demand for silicon wafers or assembly material exceeds market supply, our supply of silicon wafers or assembly material could quickly become limited or prohibitively expensive. The semiconductor industry is currently experiencing significant shortages of manufacturing capacity, which has resulted in a lengthening of the manufacturing lead time for our products. If this capacity shortage continues for an extensive period of time, it could negatively impact our ability to meet our customer’s demand for our products and have an adverse impact on our revenue, results of operations and customer relationships. In addition, silicon wafers constitute a material portion of our product cost. If we are unable to purchase wafers at favorable prices, our results of operations and financial condition will be adversely affected. It is also possible during this time of supply chain capacity shortage that customers may place orders for our products that exceed their actual demand, which may lead to us manufacturing a surplus of products and could have a negative impact on our results of operations and cash reserves.

22

Our primary inventory warehouse is located in Hong Kong and may be affected by continued political, social and economic conditions in Hong Kong.

We operate a warehouse facility in Hong Kong through which the substantial majority of our finished SoCs are shipped to customers or logistic partners. Hong Kong has experienced, and continues to experience, political unrest and social strife. In response to national security legislation adopted by the Chinese government, the U.S. Secretary of State certified to the U.S. Congress in May 2020 that Hong Kong no longer maintains a sufficient degree of autonomy from China to warrant special treatment by the U.S. While such certification does not have an immediate impact on Hong Kong for trade or other purposes, this action represents an escalation in political and trade tensions involving the U.S, China and Hong Kong. In addition, the Bureau of Industry and Security, or BIS, has imposed additional restrictions on exports and reexports of U.S.-controlled items to Hong Kong by removing preferential treatment that Hong Kong used to receive and imposing more stringent licensing requirements similar to those applicable to China. It is possible that the U.S. government may take future measures to impose stricter export controls or duties on shipments made to Hong Kong, which could harm our business, increase the cost of conducting our operations in Hong Kong or result in retaliatory actions against U.S. interests. While we have not been materially impacted by these problems to date, continued deterioration in political, social or economic conditions in Hong Kong or future unforeseen problems, including health pandemics, could affect deliveries of our SoCs to our customers or logistic partners, possibly resulting in business interruptions, substantially delayed or lost sales, loss of inventory, or increased expenses that cannot be passed on to customers, any of which could ultimately have a material adverse effect on our business and financial results. In such an eventuality, we could be forced to relocate our warehouse operations, either temporarily or permanently, to another potentially costlier location or find alternative potentially costlier methods of shipping our finished SoCs to customers and logistic partners.

Our target markets may not grow or develop as we currently expect and are subject to market risks, any of which could harm our business, revenue and operating results.

We are focusing our development resources on addressing computer vision applications, primarily in the professional IP security and home security and monitoring camera markets, the OEM automotive and robotics markets, with our computer vision solutions. The application of computer vision functionality in these markets is relatively new, and we may be unable to predict the timing or development of these markets with accuracy. For example, a slower than expected adoption rate for computer vision technology in the IP security camera market could slow the demand for our new solutions. Similarly, a slower than anticipated adoption of electronic mirrors, advanced driving assistance systems and autonomous driving functionality could reduce demand for our new computer vision solutions. The COVID-19 pandemic has had a negative impact on the global economy and may decrease or delay development of new markets and new programs in emerging markets. If our key target markets, such as automotive cameras, IP security cameras and cameras for robotic applications, do not grow, grow slower, or do not develop in ways that we currently expect, demand for our computer vision, video and image processing SoCs may not materialize as expected, and our business and operating results could suffer.

Our customers may cancel their orders, change production quantities or delay production. If we fail to accurately forecast demand for our solutions, revenue shortfalls or excess, obsolete or insufficient inventory could result.

Our customers typically do not provide us with firm, long-term purchase commitments. A substantial majority of our sales are made on a purchase order basis, which permits our customers to cancel, change or delay their product purchase commitments with little or no notice to us and often without penalty to them. Because production lead times often exceed the amount of time required by our customers to fill their orders, we often must build SoCs in advance of receiving orders from customers, relying on an imperfect demand forecast to project volumes and product mix. As a result of a number of factors, including longer manufacturing times for our products and increased demand from customers, we have increased our inventory levels in the near term.

Our SoCs are incorporated into products manufactured by or for our end customers, and as a result, demand for our solutions is influenced by the demand for our customers’ products. Our ability to accurately forecast demand can be adversely affected by a number of factors, including inaccurate forecasting by our customers, miscalculations by our customers of their inventory requirements, changes in market conditions including reductions in market activity due to the COVID-19 pandemic, adverse changes in our product order mix and fluctuating demand for our customers’ products. Even after an order is received, our customers may cancel these orders, request a decrease in production quantities or request a delay in the delivery of our solutions. Any such cancellation, decrease or delay subjects us to a number of risks, most notably that our projected sales will not materialize on schedule or at all, leading to unanticipated revenue shortfalls and excess or obsolete inventory that we may be unable to sell to other customers. This risk may be exacerbated during the current period of supply chain constraints by customers placing orders with us that could exceed their actual demand for our solutions.

23

Alternatively, if we are unable to project customer requirements accurately, we may not build enough SoCs, which could lead to delays in product shipments and lost sales opportunities in the near term, as well as force our customers to identify alternative sources, which could affect our ongoing relationships with these customers. In addition, the rapid pace of innovation in our industry could render portions of our inventory obsolete. Excess or obsolete inventory levels could result in unexpected expenses or increases in our reserves that could adversely affect our business, operating results and financial condition.

We depend on a limited number of customers and end customers for a significant portion of our revenue. If we fail to retain or expand our customer relationships, our revenue could decline.

We derive a significant portion of our revenue from a limited number of ODMs who build products on behalf of a limited number of OEMs and from a limited number of OEMs to whom we ship directly. We anticipate that this customer concentration will continue for the foreseeable future. In fiscal year 2022, the customers representing 10% or more of our revenue were WT Microelectronics Co., Ltd., formerly Wintech Microelectronics Co., Ltd., or Wintech, our distributor, and Chicony Electronics Co., Ltd., or Chicony, a direct ODM customer, which accounted for approximately 62% and 13% of total revenue, respectively. We believe that our operating results for the foreseeable future will continue to depend on sales to a relatively small number of customers and end customers. In the future, these customers may decide not to purchase our SoC solutions at all, may purchase fewer solutions than they did in the past or may alter their purchasing patterns. As substantially all of our sales to date have been made on a purchase order basis, these customers may cancel, change or delay product purchase commitments with little or no notice to us and often without penalty and may make our revenue volatile from period to period, which has happened in the past. The loss of a significant customer, or substantial reduction in purchases by a significant customer, could happen again at any time and without notice, and such loss would likely harm our financial condition and results of operations. Moreover, because several of our largest OEM customers have a dominant position in their markets, a loss of a significant customer may not be easily replaced.

Achieving design wins is subject to lengthy competitive selection processes that require us to incur significant costs. Even if we begin a product design, a customer may decide to cancel or change its product plans, resulting in no revenue from such expenditures.

We are focused on selling our computer vision, video and image processing solutions to ODMs and OEMs for incorporation into their products at the design stage. These efforts to achieve design wins typically are lengthy, especially in emerging markets such as the OEM automotive market, and in any case can require us to both incur design and development costs and dedicate scarce engineering resources in pursuit of a single customer opportunity. We may not prevail in the competitive selection process, and even when we do achieve a design win, we may never generate any revenue despite incurring development expenditures. In addition, even if an OEM designs one of our SoC solutions into one of its products, we cannot be assured that we will secure new design wins from that OEM for future products. Further, even after securing a design win, we have experienced and may again experience delays in generating revenue from our solutions as a result of the lengthy product development cycle typically required, if we generate any revenue at all as a result of any such design win.

Our customers generally take a considerable amount of time to evaluate our solutions. The typical time from early engagement by our sales force to actual product introduction runs from nine to 12 months for IoT markets and potentially significantly longer in the OEM automotive, robotics and industrial markets. The delays inherent in these lengthy sales cycles increase the risk that a customer will decide to cancel, curtail, reduce or delay its product plans, causing us to lose anticipated sales. In addition, any delay or cancellation of a customer’s plans could harm our financial results, as we may have incurred significant expense and generated no revenue. If we were unable to generate revenue after incurring substantial expenses to develop any of our solutions, our business would suffer.

Some of our customers may require our products and our third-party contractors to undergo a qualification process that does not assure product sales. If we are unsuccessful or delayed in qualifying these products or third-party contractors with a customer, our business and operating results could suffer.

Prior to purchasing our products, some of our customers, particularly in the automotive market, may require that our products and our third-party contractors undergo extensive qualification processes, which involve testing of our products in the customers’ systems, as well as testing for reliability. This qualification process may take several months and qualification of a product by a customer does not assure any sales of the product to that customer. Even after successful qualification and sales of a product to a customer, a subsequent revision in our third party contractors’ manufacturing process or our selection of a new supplier may require a new qualification process, which may result in delays and in our holding excess or obsolete inventory. After our products are qualified, it can take several months or more before the customer commences volume production of components or systems that incorporate our products. Despite these uncertainties, we devote substantial resources, including design, engineering, sales, marketing and management efforts, to qualify our products with customers in anticipation of sales. If we are unsuccessful or delayed in qualifying these products with a customer, sales of the products to the customer may be precluded or delayed, which may impede our growth and cause our business to suffer.

24

We expect competition to increase in the future, which could have an adverse effect on our revenue and market share.

The global semiconductor market in general, and the computer vision and video/image processing markets in particular, are highly competitive. We compete in different target markets to various degrees on the basis of a number of competitive factors, including our solutions’ performance, features, energy efficiency, size, ease with which our solution may be integrated into our customers’ products, customer support, reliability and price, as well as on the basis of our reputation. We expect competition to increase and intensify as more and larger semiconductor companies enter our markets and as existing competitors improve or expand their product offerings. We also expect that the trend among large OEMs to seek to develop their own semiconductor solutions will continue and expand, particularly in camera markets experiencing consolidation, such as the IP security market. In addition, in our newer markets, such as the OEM automotive and robotics markets, we will face competition from larger competitors with longer histories in these markets. Increased competition could result in price pressure, reduced profitability and loss of market share, any of which could harm our business, revenue and operating results.

Our competitors range from large, international companies with greater resources offering a wide range of semiconductor products to smaller, nimble companies specializing in narrow markets. Certain of our customers and suppliers also have divisions that produce products competitive with ours and other customers may seek to vertically integrate competitive solutions in the future. In addition, certain third-party developers of technology competitive to our solutions have licensed their technology, including image signal processing and computer vision IP, which potentially enables a greater number of competitors to offer competitive solutions.

Our ability to compete successfully depends on elements both within and outside of our control. Many of our competitors are substantially larger, have greater financial, technical, marketing, distribution, customer support and other resources, are more established than we are and have significantly better brand recognition and broader product offerings than us, which may enable them to develop and enable new technology into product solutions better or faster than us and to better withstand adverse economic or market conditions in the future. Our ability to compete will depend on a number of factors, including:

Our competitors may also establish cooperative relationships among themselves or with third parties or acquire companies that provide similar products to ours. As a result, new competitors or alliances may emerge that could acquire significant market share. Any of these factors, alone or in combination with others, could harm our business and result in a loss of market share and an increase in pricing pressure.

25

A breach of our security systems may have a material adverse effect on our business.

Our security systems are designed to maintain the physical security of our facilities and information systems and protect our customers’, suppliers’ and employees’ confidential information. Accidental or willful security breaches or other unauthorized access by third parties to our facilities or our information systems or the existence of computer viruses in our data or software could expose us to a risk of information loss and misappropriation of proprietary and confidential information. The costs to us to eliminate or alleviate cyber or other security problems, bugs, viruses, malicious software programs and security vulnerabilities could be significant, and our efforts to address these problems may not be successful and could result in interruptions and delays that may impede our sales, product distribution, financial reporting or other critical functions.  In addition, we could incur significant costs in notifying affected persons and entities and otherwise complying with the multitude of foreign, federal, state and local laws and regulations relating to the unauthorized access to, or use or disclosure of, personal information.

Security breaches, computer malware and computer hacking attacks have become more prevalent and sophisticated. These threats are constantly evolving, making it increasingly difficult to successfully defend against or implement adequate preventive measures.  Moreover, as a result of the COVID-19 pandemic, the need for remote work and remote access to our systems has increased significantly, which also increases our cybersecurity risk profile. Experienced computer programmers and hackers may be able to penetrate our security controls and misappropriate or compromise our confidential information or that of third parties or create system disruptions. Computer programmers and hackers also may be able to develop and deploy viruses, worms and other malicious software programs that attack our information systems and cause disruptions of our business. For portions of our IT infrastructure, we rely on products and services provided by third parties. These third-party providers may also experience breaches and attacks to their products, which could impact our systems. For example, in 2020, SolarWinds Corp., one of our third-party IT infrastructure software providers, was subject to a data security breach. Our investigation of the breach, which was supported by a third-party security expert, has not identified any adverse impact to our business or operations, but there can be no guarantee we will not experience such an impact. Data security breaches may also result from non-technical means, for example, actions by an employee. Any theft or misuse of this information could result in, among other things, damage to our reputation, allegations by our customers that we have not performed our contractual obligations, litigation by affected parties and possible financial obligations for liabilities and damages related to the theft or misuse of this information, any of which could have a material adverse effect on our business, financial condition, our reputation, and our relationships with our customers and partners. We may also encounter errors in corruption or loss of data, an inability to accurately process or record transactions, and security or technical reliability issues. All of these could harm our ability to conduct core operating functions such as processing purchase orders and invoices, product distribution, recording and reporting financial and management information on a timely and accurate basis, and could impact our internal control compliance efforts.

We also rely on a number of third-party “cloud-based” service providers of corporate infrastructure services relating to, among other things, human resources, electronic communication services and some finance functions, and we are, of necessity, dependent on the security systems of these providers. Any security breaches or other unauthorized access by third parties to the systems of our cloud-based service providers or the existence of computer viruses in their data or software could expose us to a risk of information loss and misappropriation of confidential information.

While we intend to continue to invest in research and development, we may be unable to make the substantial investments that are required to remain competitive in our business.

The semiconductor industry requires substantial investment in research and development in order to bring to market new and enhanced solutions. Our research and development expense was $167.3 million, $140.8 million and $129.7 million in fiscal years 2022, 2021 and 2020, respectively. We expect to increase our research and development expenditures as compared to prior periods as part of our strategy of focusing on the development of innovative computer vision, video and image processing solutions with increased functionality, and as we target new markets, such as the automotive OEM and robotics markets. We are unable to predict whether we will have sufficient resources to achieve the level of investment in research and development required to remain competitive. For example, development in the latest process nodes, such as 5 nanometer, or nm, or smaller, costs significantly more than required to develop in larger process nodes, such as 14 or 10nm. This added cost could prevent us from being able to maintain a technology advantage over larger competitors that have significantly more resources to invest in research and development. In addition, we cannot assure you that the technologies which are the focus of our research and development expenditures will become commercially successful or generate any revenue.

26

The loss of any of our key personnel could seriously harm our business.

We believe our future success depends in large part upon the continuing services of the members of our senior management team and various engineering and other technical personnel. If one or more of our senior executives or other key personnel are unable or unwilling to continue in their present positions, we may not be able to replace them easily or at all, our business may be disrupted, and our financial condition and results of operations may be materially and adversely affected. In addition, if any member of our senior management team or any of our other key personnel joins a competitor or forms a competing company, we may experience material disruption of our operations and development plans and lose customers, know-how and key professionals and staff members, and we may incur increased operating expenses as the attention of other senior executives is diverted to recruit replacements for key personnel.

We rely on highly skilled personnel and, if we are unable to hire, retain or motivate key personnel, we may not be able to grow effectively.

Our performance largely depends on the talents and efforts of highly skilled individuals. Our future success depends on our continuing ability to identify, hire, develop, motivate, and retain highly skilled personnel for all areas of our organization. Our industry is characterized by high demand and intense competition for talent, particularly for engineering personnel.  The pool of qualified candidates is limited, particularly in Silicon Valley and parts of Asia for very-large-scale integration, or VLSI, and artificial intelligence and computer vision engineers, and certain of our competitors and potential competitors with greater resources have directly targeted our employees.  In addition, we also face competition in hiring artificial intelligence engineers, including from companies with which we do not directly compete. Our compensation arrangements, such as our equity award programs, may not always be successful in attracting new employees and retaining and motivating our existing employees. Our continued ability to compete effectively, and to grow our business, depends on our ability to attract new employees and to retain and motivate our existing employees.

The average selling prices of video and image processing solutions in our target markets have typically decreased over time and will likely do so in the future, which could harm our revenue and gross margins.

Average selling prices of semiconductor products in the markets we serve have historically decreased over time, and we expect such declines to occur for our solutions over time. Our gross margins and financial results will suffer if we are unable to offset reductions in our average selling prices by reducing our costs, developing new or enhanced SoC solutions on a timely basis with higher selling prices or gross margins, or increasing our sales volumes. Additionally, because we do not operate our own manufacturing, assembly or testing facilities, we may not be able to reduce our costs as rapidly as companies that operate their own facilities, and our costs may even increase, which could also reduce our gross margins. In the past, we have reduced the prices of our SoC solutions in anticipation of future competitive pricing pressures, new product introductions by us or our competitors and other factors.  We expect that we will have to address pricing pressures again in the future, particularly in markets experiencing consolidation, which could require us to reduce the prices of our SoC solutions and harm our operating results.

If we are unable to manage any future growth, we may not be able to execute our business plan and our operating results could suffer.

Our business has grown rapidly in the past. Our future operating results depend to a large extent on our ability to successfully manage any expansion and growth, including the challenges of managing a company with an executive management team in the United States and the majority of its employees in Asia. We are increasing our investment in research and development and other functions to grow our business and address new markets, such as the OEM automotive and robotics markets. To manage growth successfully, we believe we must effectively, among other things:

27

We are likely to incur the costs associated with these increased investments earlier than some of the anticipated benefits, and the return on these investments, if any, may be lower, may develop more slowly than we expect or may not materialize. If we are unable to manage growth effectively, we may not be able to take advantage of market opportunities or develop new solutions, and we may fail to satisfy customer product or support requirements, maintain product quality, execute our business plan or respond to competitive pressures.

Deterioration of the financial conditions of our customers could adversely affect our operating results.

Deterioration of the financial condition of our distributors or customers could adversely impact our collection of accounts receivable. In fiscal year 2022, the customers representing 10% or more of revenue and accounts receivable were Wintech and Chicony, which accounted for approximately 62% and 13% of total revenue, respectively. As of January 31, 2022, accounts receivable with Wintech and Chicony were approximately $23.3 million and $7.4 million, respectively. We regularly review the collectability and creditworthiness of our distributors and customers to determine an appropriate allowance for credit losses. Based on our review of our distributors and customers, we currently have only immaterial reserves for uncollectible accounts. If our uncollectible accounts, however, were to exceed our current or future allowance for credit losses, our operating results would be negatively impacted.

We are subject to the cyclical nature of the semiconductor industry.

The semiconductor industry is highly cyclical and is characterized by constant and rapid technological change, rapid product obsolescence, price erosion, evolving standards, short product life cycles and wide fluctuations in product supply and demand. The industry experienced a significant downturn during the 2008-2009 global recession. These downturns have been characterized by diminished product demand, production overcapacity, high inventory levels and accelerated erosion of average selling prices. Any future downturns could harm our business and operating results. Recently, the semiconductor industry has experienced increased competition for access to third-party foundry and assembly capacity. We are dependent on the availability of this capacity to manufacture and assemble our SoC solutions. None of our third-party foundry or assembly contractors has provided assurances that adequate capacity will be available to us in the future. The semiconductor industry is currently experiencing significant shortages of capacity, which has resulted in a lengthening of the manufacturing lead time for our products. This capacity shortage has negatively impacted our ability to meet our customers’ demand, and if this capacity shortage continues for an extensive period of time, it could further negatively impact our ability to meet our customers’ demand for our products and have an adverse impact on our revenue, results of operations and customer relationships. In addition, it is possible during this time of supply chain capacity shortage that customers may place orders for our products that exceed their actual demand, which may lead to us manufacturing a surplus of products, which could have a negative impact on our results or operations and cash reserves.

The complexity of our solutions could result in unforeseen delays or expenses from undetected defects, errors or bugs in hardware or software which could reduce the market adoption of our new solutions, damage our reputation with current or prospective customers and adversely affect our operating costs.

Highly complex SoC solutions such as ours frequently contain defects, errors and bugs when they are first introduced or as new versions are released. We have in the past and may in the future experience these defects, errors and bugs. If any of our solutions have reliability, quality or compatibility problems, we may not be able to successfully correct these problems in a timely manner or at all. In addition, if any of our proprietary features contain defects, errors or bugs when first introduced or as new versions of our solutions are released, we may be unable to timely correct these problems. Consequently, our reputation may be damaged and customers may be reluctant to buy our solutions, which could harm our ability to retain existing customers and attract new customers, and could adversely affect our financial results. In addition, these defects, errors or bugs could interrupt or delay sales to our customers. If any of these problems are not found until after we have commenced commercial production of a new product, we may incur significant additional development costs and product recall, repair or replacement costs. These problems may also result in claims against us by our customers or others.

28

We may experience difficulties in transitioning to new wafer fabrication process technologies or in achieving higher levels of design integration, which may result in reduced manufacturing yields, delays in product deliveries and increased costs.

We aim to use the most advanced manufacturing process technology appropriate for our products that is available from our third-party foundries. As a result, we periodically evaluate the benefits of migrating our solutions to smaller geometry process technologies in order to improve performance and reduce costs. We believe this strategy will help us remain competitive. We may face difficulties, delays and increased expense as we transition our products to new processes, such as the 4nm or 3nm process node, and potentially to new foundries. We currently depend on Samsung, as the principal foundry for our products, to transition to new processes successfully. We cannot assure you that Samsung will be able to effectively manage such transitions or that we will be able to maintain our relationship with Samsung or develop relationships with new foundries. Moreover, as we utilize more advanced process nodes beyond 5nm, we are increasingly dependent upon a very small number of foundries currently available for certain advanced process technologies. If we or our foundry vendors experience significant delays in transitioning to smaller geometries or fail to efficiently implement transitions, we could experience reduced manufacturing yields, delays in product deliveries and increased costs, all of which could harm our relationships with our customers and our operating results.

Rapidly changing industry standards could make our video and image processing solutions obsolete, which would cause our operating results to suffer.

We design our video and image processing solutions to conform to video compression standards, including MPEG-2, H.264 Advanced Video Coding (AVC) and H.265 High Efficiency Video Coding (HEVC), set by industry standards setting bodies such as ITU-T Video Coding Experts Group and the ISO/IEC Moving Picture Experts Group. Generally, our solutions comprise only a part of a camera device. All components of these devices must uniformly comply with industry standards in order to operate efficiently together. We depend on companies that provide other components of the devices to support prevailing industry standards. Many of these companies are significantly larger and more influential in driving industry standards than we are. Some industry standards may not be widely adopted or implemented uniformly, and competing standards may emerge that may be preferred by our customers or by consumers. If our customers or the suppliers that provide other device components adopt new or competing industry standards with which our solutions are not compatible, or if the industry groups fail to adopt standards with which our solutions are compatible, our existing solutions would become less desirable to our customers. If our solutions are not in compliance with prevailing industry standards for a significant period of time, we could miss opportunities to achieve crucial design wins, which could harm our business.  As a result, our sales would suffer, and we could be required to make significant expenditures to develop new SoC solutions to ensure compliance with relevant standards.

Some of our operations and a significant portion of our customers and our subcontractors are located outside of the United States, which subjects us to additional risks, including increased complexity and costs of managing international operations and geopolitical instability.

We have research and development design centers and business development offices in China, Germany, Italy, Japan, South Korea and Taiwan, and we expect to continue to conduct business with companies that are located outside the United States, particularly in Asia. We purchase wafers from foreign foundries, have our solutions assembled and tested by subcontractors located in Asia, and supply our solutions to customers located outside of the United States. Even customers of ours that are based in the United States often use contract manufacturers based in Asia to manufacture their products, and these contract manufacturers typically purchase products directly from us. As a result of our international focus, we face numerous challenges and risks, including:

29

Our acquisition of Oculii Corp. involves a number of risks, including, among others, risks associated with our use of a significant portion of our cash, other financial risks, integration risks, and risks associated with the reactions of customers and suppliers.

On November 5, 2021, we completed our acquisition of Oculii Corp. In connection with the transaction, Oculii became our wholly owned subsidiary. The benefits we expect to realize from this acquisition will depend, in part, on our ability to integrate the businesses successfully and efficiently.

We entered into the merger agreement with Oculii with the expectation that the merger will result in various benefits to us, including certain technology and operational efficiencies or synergies. To realize these anticipated benefits, the businesses and certain technologies of Ambarella and Oculii must be successfully integrated. Historically, Ambarella and Oculii have been independent companies, and they were operated as such until the completion of the merger. The integration may be complex and time consuming and may require substantial resources and effort. Our management may face significant challenges in consolidating the operations of Ambarella and Oculii, integrating the technologies, procedures, and policies, as well as addressing the different corporate cultures of the two companies and retaining key personnel. If the businesses or technology are not successfully integrated, the anticipated benefits of the merger may not be realized fully or at all or may take longer to realize than expected.

Our existing or prospective customers, licensees, suppliers and/or partners may delay, defer or cease purchasing products or services from or providing products or services to us, delay or defer other decisions concerning us, or otherwise seek to change the terms on which they do business with us. Any of the above could harm us, and thus decrease the benefits we expect to receive from the merger.

In addition, the acquisition may also result in significant charges or other liabilities, including taxes, that could adversely affect our results of operations, such as cash expenses and non-cash accounting charges incurred in connection with the acquisition and/or integration of the business and operations of Ambarella and Oculii. The amount and timing of these possible charges are not yet known. Further, our failure to identify or accurately assess the magnitude of certain liabilities we are assuming in the transaction could result in unexpected litigation or regulatory exposure, unfavorable accounting charges, unexpected increases in taxes due, a loss of anticipated tax benefits or other adverse effects on our business, results of operations, financial condition or cash flows.

The Oculii acquisition or potential future acquisitions involve a number of risks, including, among others, those associated with our use of a significant portion of our cash and other financial risks.

We used a significant portion of our cash in connection with the acquisition of Oculii, which was completed on November 5, 2021. Our use of cash to fund the Oculii acquisition has reduced our liquidity and any future acquisitions may also reduce our liquidity and or require the use of equity. Using cash to fund acquisitions may limit our flexibility in responding to other business opportunities and increase our vulnerability to adverse economic and industry conditions.

30

Our acquisition of Oculii and any acquisitions we may make in the future could disrupt our business, cause dilution to our shareholders, reduce our financial resources and harm our business.

Prior to our acquisition of Oculii, we had not made any acquisitions since our acquisition of VisLab S.r.l. in June 2015. Our ability to make and successfully integrate acquisitions is largely unproven. The Oculii acquisition and any future acquisitions may not strengthen our competitive position and may be viewed negatively by our customers, financial markets or investors, and we may not achieve our goals in a timely manner, or at all. In addition, any acquisitions we make could lead to difficulties in integrating personnel, technologies and operations from the acquired businesses and in retaining and motivating key personnel from these businesses. Acquisitions may disrupt our ongoing operations, divert management from their primary responsibilities, subject us to additional liabilities, increase our expenses and adversely impact our business, operating results, financial condition and cash flows. Acquisitions may also reduce our cash available for operations and other uses, and could also result in an increase in amortization expense related to identifiable assets acquired, potentially dilutive issuances of equity securities or the incurrence of debt, any of which could harm our business.

The complexity of calculating our tax provision may result in errors that could result in restatements of our financial statements.

We are incorporated in the Cayman Islands and our operations are subject to income and transaction taxes in the United States, China, Hong Kong, Germany, Italy, Japan, South Korea, Taiwan and other jurisdictions in which we do business. Due to the complexity associated with the calculation of our tax provision, we have hired independent tax advisors to assist us. If we or our independent tax advisors fail to resolve or fully understand certain issues, there may be errors that could result in us having to restate our financial statements. Restatements are generally costly and could adversely impact our results of operations or have a negative impact on the trading price of our ordinary shares.

Risks Related to Our Financial Performance or Results

Fluctuations in our operating results on a quarterly and annual basis could cause the market price of our ordinary shares to decline.

Our revenue and operating results have fluctuated significantly from period to period in the past and are likely to do so in the future. In particular, our business has tended to be seasonal with higher revenue in our third quarter as our customers typically increase their production to meet holiday shopping season or year-end demand for their products. We also may experience seasonally lower demand in our first quarter as a result of industry seasonality and the impact of ODM and OEM factory closures associated with the Chinese New Year holiday. As a result, you should not rely on period-to-period comparisons of our operating results as an indication of our future performance. In future periods, our revenue and results of operations may be below the expectations of analysts and investors, which could cause the market price of our ordinary shares to decline.

Factors that may affect our operating results include:

31

Moreover, the semiconductor industry has historically been cyclical in nature, reflecting overall economic conditions as well as budgeting and buying patterns of consumers. For example, the semiconductor industry is currently experiencing significant shortages of capacity, which has resulted in a lengthening of the manufacturing lead time for our products and could be impacting the normal forecasting and ordering patterns of our customers. We expect these cyclical conditions to continue. As a result, our quarterly operating results are difficult to predict, even in the near term. Our expense levels are relatively fixed in the short term and are based, in part, on our expectations of future revenue. If revenue levels are below our expectations, we may experience material adverse impacts on our business, including declines in margins and profitability, or incur losses.

If we do not generate revenue growth, we may not be able to execute our business plan and our operating results could suffer.

We believe that our future revenue growth, if any, will significantly depend on our ability to expand within our existing IoT camera markets, such as the existing professional IP security and home security and monitoring camera markets, and successfully penetrate new markets, such as the OEM automotive, robotics and industrial markets, with our new AI computer vision SoC solutions.  We believe that executing upon our business plan requires us to continue to develop new SoCs and new software to address the particular requirements of these markets. Accordingly, we continue to invest in the development of new technology and solutions and expect our research and development expenditures to increase compared to prior periods. If we are unable to generate or maintain adequate revenue growth, our financial results could suffer and we may not be able to continue to invest in the development of new technology and solutions required to be successful.

We may have difficulty accurately predicting our future revenue and appropriately budgeting our expenses.

The rapidly evolving nature of the markets in which we sell our solutions, combined with substantial uncertainty concerning how these markets may develop, the considerable amount of time our customers generally take to evaluate our solutions, and other factors beyond our control, limits our ability to accurately forecast quarterly or annual revenue. We continue to expand our staffing and increase our expenditures in anticipation of future revenue growth. If our revenue does not increase as anticipated, we could incur significant losses due to our higher expense levels if we are not able to decrease our expenses in a timely manner to offset any shortfall in future revenue. Continued or persistent losses may require us to obtain additional capital that may not be available on reasonable terms or at all.

Changes to financial accounting standards may affect our results of operations and could cause us to change our business practices.

We prepare our consolidated financial statements to conform to generally accepted accounting principles, or GAAP, in the United States. These accounting principles are subject to interpretation by the American Institute of Certified Public Accountants, the SEC and various bodies formed to interpret and create accounting rules and regulations. Changes in those accounting rules could have a significant effect on our financial results, require significant resources, pose challenges in forecasting revenue and may affect our reporting of transactions completed before a change is announced. Changes to those rules or the questioning of current practices may adversely affect our reported financial results or the way we conduct our business.

32

Fluctuations in exchange rates between and among the currencies of the countries in which we do business may adversely affect our operating results.

Our sales have been historically denominated in U.S. dollars. An increase in the value of the U.S. dollar relative to the currencies of the countries in which our end customers operate could impair the ability of our end customers to cost-effectively integrate our SoCs into their devices which may materially affect the demand for our solutions and cause these end customers to reduce their orders, which would adversely affect our revenue and business. We may experience foreign exchange gains or losses due to the volatility of other currencies compared to the U.S. dollar. A significant portion of our solutions are sold to camera manufacturers located outside the United States, primarily in Asia. Sales to customers in Asia accounted for approximately 88%, 88% and 90% of our total revenue in fiscal years 2022, 2021 and 2020, respectively. Because most of our end customers or their ODM manufacturers are located in Asia, we anticipate that a majority of our future revenue will continue to come from sales to that region. Although a large percentage of our sales are made to customers in Asia, we believe that a significant number of the products designed by these customers and incorporating our SoCs are then sold to consumers globally. In addition, if in the future we sell products or purchase inventory in currencies other than the U.S. dollar, our exposure to foreign currency risk could become more significant.

A significant number of our employees are located in Asia, principally Taiwan and China, and Europe. Therefore, a portion of our payroll as well as certain other operating expenses are paid in currencies other than the U.S. dollar, such as the New Taiwan Dollar, the Chinese Yuan Renminbi and the Eurozone Euro. Our operating results are denominated in U.S. dollars and the difference in exchange rates in one period compared to another may directly impact period-to-period comparisons of our operating results. Furthermore, currency exchange rates, particularly the exchange rates between the Chinese Yuan Renminbi and the U.S. dollar, between the New Taiwan Dollar and the U.S. dollar, and between the Eurozone Euro and the U.S. dollar, have been volatile in the recent past and these currency fluctuations may make it difficult for us to predict our operating results.

We have not implemented any hedging strategies to mitigate risks related to the impact of fluctuations in currency exchange rates. Even if we were to implement hedging strategies, not every exposure can be hedged and, where hedges are put in place based on expected foreign exchange exposure, they are based on forecasts which may vary or which may later prove to have been inaccurate. Failure to hedge successfully or anticipate currency risks accurately could adversely affect our operating results.

We cannot predict our future capital needs, and we may not be able to obtain additional financing to fund our operations.

We may need to raise additional funds in the future. Any required additional financing may not be available on terms acceptable to us, or at all. If we raise additional funds by issuing equity securities or convertible debt, investors may experience significant dilution of their ownership interest, and the newly-issued securities may have rights senior to those of the holders of our ordinary shares. If we raise additional funds by obtaining loans from third parties, the terms of those financing arrangements may include negative covenants or other restrictions on our business that could impair our operational flexibility and would also require us to incur interest expense. If additional financing is not available when required or is not available on acceptable terms, we may have to scale back our operations or limit our production activities, and we may not be able to expand our business, develop or enhance our products, take advantage of business opportunities or respond to competitive pressures which could result in lower revenue and reduce the competitiveness of our products.

33

Risks Related to Our Dependence on Third Parties

We do not have long-term supply contracts with our third-party manufacturing vendors, and they may not allocate sufficient capacity to us at reasonable prices to meet future demands for our solutions.

The semiconductor industry is subject to intense competitive pricing pressure from customers and competitors. Accordingly, any increase in the cost of our solutions, whether by adverse purchase price variances or adverse manufacturing cost variances, will reduce our gross margins and operating profit. We currently do not have long-term supply contracts with most of our primary third-party vendors, and we negotiate pricing with our main vendors on a purchase order-by-purchase order basis. Therefore, they are not obligated to perform services or supply product to us for any specific period, in any specific quantities, or at any specific price, except as may be provided in a particular purchase order. The ability of our foundry vendors to provide us with a product, which is solely sourced at each foundry, is limited by their available capacity, existing obligations and technological capabilities. Foundry capacity may not be available when we need it or at reasonable prices. None of our third-party foundry or assembly and test vendors have provided contractual assurances to us that adequate capacity will be available to us to meet our anticipated future demand for our solutions. Moreover, availability of foundry capacity at our primary foundry vendor has tightened recently, which could limit the volume of products we can produce and/or delay production of new products, both of which would negatively impact our business and operations. Similarly, our assembly vendors have recently experienced shortages of certain substrates necessary for the production of our solutions due in part to COVID-19, which has negatively impacted the production time of our devices. If these conditions continue for a substantial period or worsen, our ability to meet our anticipated demand for our solutions could be impacted which, in turn, could negatively impact our operations and financial results.

Our foundry and assembly and test vendors may allocate capacity to the production of other companies’ products while reducing deliveries to us on short notice. In particular, other companies that are larger and better financed than we are or that have long-term agreements with our foundry or assembly and test vendors may cause our foundry or assembly and test vendors to reallocate capacity to them, decreasing the capacity available to us. Converting or transferring manufacturing from a primary location or supplier to a backup provider could be expensive and would likely take at least two or more quarters. There are only a few foundries, including Samsung and Taiwan Semiconductor Manufacturing Co., Ltd., or TSMC, that are currently available for certain advanced process technologies that we utilize or may utilize, such as 10nm or 5nm. Accordingly, as we continue to develop solutions in advanced process nodes, we will be increasingly dependent upon such foundries. The unavailability of one or both of these foundries could significantly impact our ability to produce our new products or delay production, which would negatively impact our business.

We outsource our wafer fabrication, assembly and testing operations to third parties, and if these parties fail to produce and deliver our products according to requested demands in specification, quantity, cost and time, our reputation, customer relationships and operating results could suffer.

We rely on third parties for substantially all of our manufacturing operations, including wafer fabrication, assembly and testing. Currently, the majority of our SoCs are supplied by Samsung in facilities located in Austin, Texas and South Korea, from whom we have the option to purchase both fully assembled and tested products as well as tested die in wafer form for assembly. Samsung subcontracts the assembly and initial testing of the assembled chips it supplies to us to Signetics Corporation and STATS ChipPAC Ltd. In the case of purchases of tested die from Samsung, we contract the assembly to Advanced Semiconductor Engineering, Inc., or ASE. Final testing of all of our products is handled by King Yuan Electronics Co., Ltd. or Sigurd Corporation under the supervision of our engineers. We depend on these third parties to supply us with material of a requested quantity in a timely manner that meets our standards for yield, cost and manufacturing quality. Availability of capacity within our supply chain has tightened recently, which could limit the volume of products we can produce and negatively impact our business and operations. Moreover, because each SoC is fabricated in only one manufacturing facility, or single sourced, any disruption to a facility could cause significant delays in the production or shipment of the products produced in that facility that could not be easily offset by having such product(s) produced in another facility.  We do not have any long-term supply agreements with any of our manufacturing suppliers. If one or more of these vendors terminates its relationship with us, or if we encounter any problems with our manufacturing supply chain, including available capacity constraints, our ability to ship our solutions to our customers on time and in the quantity required would be adversely affected, which in turn could cause an unanticipated decline in our sales and damage our customer relationships.

If, in the future, we enter into arrangements with suppliers that include additional fees to expedite delivery, nonrefundable deposits or loans in exchange for capacity commitments or commitments to purchase specified quantities over extended periods, such arrangements may be costly, reduce our financial flexibility and be on terms unfavorable to us, if we are able to secure such arrangements at all. To date, we have not entered into any such arrangements with our suppliers. If we need additional foundry or assembly and test subcontractors because of increased demand or the inability to obtain timely and adequate deliveries from our current vendors, we may not be able to do so cost-effectively, if at all.

34

A substantial portion of our revenue is processed through a single distributor and the loss of this distributor may cause disruptions in our shipments, which may adversely affect our operations and financial condition.

We sell a significant percentage of our solutions through a single distributor, Wintech, which serves as our non-exclusive sales representative in Asia, other than Japan. Approximately 62%, 63% and 60% of our revenue was derived from sales through Wintech for the fiscal years ended January 31, 2022, 2021 and 2020, respectively. We anticipate that a significant portion of our revenue will continue to be derived from sales through Wintech in the foreseeable future. In November 2019, WPG Holdings Co., or WPG, a Taiwan distributor, announced an unsolicited bid to acquire up to 30% of Wintech. In January 2020, WPG acquired approximately 17% of Wintech, but indicated it intended to remain a passive investor in Wintech. An acquisition of Wintech by WPG could have an adverse impact on our relationship with Wintech. Our current agreement with Wintech is effective until September 2022, unless it is terminated earlier by either party for any or no reason with 60 days written notice or by failure of the breaching party to cure a material breach within 30 days following written notice of such material breach by the non-breaching party. Our agreement with Wintech will automatically renew for additional successive 12-month terms unless at least 60 days before the end of the then-current term either party provides written notice to the other party that it elects not to renew the agreement. Termination of the relationship with Wintech, either by us or by Wintech, could result in a temporary or permanent loss of revenue. We may not be successful in finding suitable alternative distributors on satisfactory terms, or at all, and this could adversely affect our ability to effectively sell our solutions in certain geographical locations or to certain end customers. Furthermore, Wintech, or any successor or other distributors we do business with, may face issues obtaining credit, which could impair their ability to make timely payments to us.

We are subject to risks associated with our distributors' product inventories.

We sell many of our products to customers through distributors who maintain their own inventory of our products for sale to ODMs and end customers. We allow limited price adjustments on sales to distributors. Price adjustments may be effected by way of credits for future product or by cash payments to the distributor, either in arrears or in advance, using estimates based on historical transactions. In accordance with ASC 606, we recognize revenue on sales to distributors upon shipment and transfer of control (known as “sell-in” revenue recognition) based on the amount of consideration expected to be received. To the extent that the actual consideration received is materially different from estimated variable consideration recognized, we may be required to adjust revenue in subsequent periods.

If our distributors are unable to sell an adequate amount of their inventory of our products in a given quarter to ODMs and end customers, or if they decide to decrease their inventories for any reason, such as adverse global economic conditions or a downturn in technology spending, our sales to these distributors and our revenues may decline. We also face the risk that our distributors may purchase, or for other reasons accumulate, inventory levels of our products in any particular quarter in excess of future anticipated sales to end customers. If such sales do not occur in the time frame anticipated by these distributors for any reason, these distributors may substantially decrease the amount of product they order from us in subsequent periods until their inventory levels realign with end-customer demand, which would harm our business and could adversely affect our revenues in such subsequent periods. Our reserve estimates associated with products stocked by our distributors are based largely on reports that our distributors provide to us on a weekly or monthly basis. To the extent that these data are inaccurate or not received in a timely manner, we may not be able to make reserve estimates for future periods accurately or at all.

Camera manufacturers incorporate components supplied by multiple third parties, and a supply shortage or delay in delivery of these components could delay orders for our solutions by our customers.

Our customers purchase components used in the manufacture of their cameras from various sources of supply, often involving several specialized components, including lenses, sensors, and memory chips. Any supply shortage or delay in delivery by third-party component suppliers, or a third-party supplier’s cessation or shut down of its business, may prevent or delay production of our customers’ products. As a result of delays in delivery or supply shortages of third-party components, orders for our solutions may be delayed or canceled and our business may be harmed. The semiconductor industry is currently experiencing shortages of certain devices, which has impacted, and may continue to impact, our customers’ ability to build their products and negatively impact our customers’ demand for our solutions. Similarly, our ability to generate design wins in some markets, such as the automotive OEM market, requires us to collaborate with third-party software suppliers in order to offer a complete solution to customers. Our inability to successfully collaborate with such third-party suppliers, or such suppliers’ inability to develop and deliver software, could harm our ability to achieve design wins and harm our business. Errors or defects within a camera system or in the manner in which the various components interact could prevent or delay production of our customers’ products, which could harm our business.

35

If our foundry vendors do not achieve satisfactory yields or quality, our reputation and customer relationships could be harmed.

The fabrication of our video and image processing SoC solutions is a complex and technically demanding process. Minor deviations in the manufacturing process can cause substantial decreases in yields, and in some cases, cause production to be suspended. Our foundry vendors, from time to time, experience manufacturing defects and reduced manufacturing yields, including in the fabrication of our SoCs. Changes in manufacturing processes or the inadvertent use of defective or contaminated materials by our foundry vendors could result in lower than anticipated manufacturing yields or unacceptable performance of our SoCs. Many of these problems are difficult to detect at an early stage of the manufacturing process and may be time consuming and expensive to correct. Poor yields from our foundry vendors, or defects, integration issues or other performance problems in our solutions, could cause us significant customer relations and business reputation problems, harm our financial results and give rise to financial or other damages to our customers. Our customers might consequently seek damages from us for their losses. A product liability claim brought against us, even if unsuccessful, would likely be time consuming and costly to defend.

Each of our SoC solutions is manufactured at a single location. If we experience manufacturing problems at a particular location, we would be required to transfer manufacturing to a new location or supplier. Converting or transferring manufacturing from a primary location or supplier to a backup fabrication facility could be expensive and could take two or more quarters. During such a transition, we would be required to meet customer demand from our then-existing inventory, as well as any partially finished goods that could be modified to the required product specifications. We do not seek to maintain sufficient inventory to address a lengthy transition period because we believe it is uneconomical. As a result, we may not be able to meet customer needs during such a transition, which could delay shipments, cause production delays, result in a decline in our sales and damage our customer relationships.

We rely on third-party vendors to supply software development tools to us for the development of our new products, and we may be unable to obtain the tools necessary to develop or enhance new or existing products.

We rely on third-party software development tools to assist us in the design, simulation and verification of new products or product enhancements. To bring new products or product enhancements to market in a timely manner, or at all, we need software development tools that are sophisticated enough or technologically advanced enough to complete our design, simulations and verifications. In the future, the design requirements necessary to meet consumer demands for more features and greater functionality from our solutions may exceed the capabilities of available software development tools. Unavailability of software development tools may result in our missing design cycles or losing design wins, either of which could result in a loss of market share or negatively impact our operating results.

Because of the importance of software development tools to the development and enhancement of our solutions, our relationships with leaders in the computer-aided design industry, including Cadence Design Systems, Inc., Mentor Graphics Corporation and Synopsys, Inc., are critical to us. If these relationships are not successful, we may be unable to develop new products or product enhancements in a timely manner, which could result in a loss of market share, a decrease in revenue or negatively impact our operating results.

We rely on third parties to provide services and technology necessary for the operation of our business. Any failure of one or more of our vendors, suppliers or licensors to provide such services or technology could harm our business.

We rely on third-party vendors to provide critical services, including, among other things, services related to accounting, human resources, information technology and network monitoring that we cannot or do not create or provide ourselves. We depend on these vendors to ensure that our corporate infrastructure will consistently meet our business requirements. The ability of these third-party vendors to successfully provide reliable and high-quality services is subject to technical and operational uncertainties that are beyond our control. While we may be entitled to damages if our vendors fail to perform under their agreements with us, our agreements with these vendors limit the amount of damages we may receive. In addition, we do not know whether we will be able to collect on any award of damages or that these damages would be sufficient to cover the actual costs we would incur as a result of any vendor’s failure to perform under its agreement with us. Upon expiration or termination of any of our agreements with third-party vendors, we may not be able to replace the services provided to us in a timely manner or on terms and conditions, including service levels and cost, that are favorable to us, and a transition from one vendor to another vendor could subject us to operational delays and inefficiencies until the transition is complete.

36

Any disruption to the operations of our third-party contractors and their suppliers could cause significant delays in the production or shipment of our products.

Our operations could be harmed if manufacturing, logistics or other operations of our third-party contractors or their suppliers are disrupted for any reason, including natural disasters, high heat events or water shortages, severe storms, other negative impacts from climate change, information technology system failures, military actions or environmental, public health or regulatory issues. The majority of our products are manufactured by or receive components from third-party contractors located in South Korea, Taiwan and Japan. The risk of an earthquake or tsunami in South Korea, Taiwan, Japan and elsewhere in the Pacific Rim region is significant due to the proximity of major earthquake fault lines. A disruption in the availability of image sensors from Sony Corporation as a result of the 2016 Kumamoto, Japan earthquake impacted our customers’ ability to build or launch cameras and, as a result, negatively impacted the timing and scope of demand for our SoCs in fiscal year 2017. Similarly, a severe cold storm in Texas in February 2021 disrupted the manufacturing of some of our products at Samsung’s Texas facility for several weeks. Any disruption resulting from such events could cause significant delays in the production or shipment of our products until we are able to shift our manufacturing, assembling or testing from the affected contractor to another third-party vendor. We may not be able to obtain alternate capacity on favorable terms, or at all.

Risks Related to Our Legal and Regulatory Environment

Our ability to sell our products to several China customers has been restricted.

In October 2019, our security camera customers Hangzhou Hikvision Digital Technology Co., Ltd, or Hikvision, and Zhejiang Dahua Technology Co., Ltd., or Dahua, were added to the Entity List of the Bureau of Industry and Security, or BIS, of the U.S. Department of Commerce, or Commerce, which imposes limitations on the supply of certain U.S. items to the listed entities. In December 2020, certain affiliated entities of our customer Shenzhen Dajiang Baiwang Technology Co., Ltd., or Dajiang Baiwang, were added to the Entity List. While the addition of such customers to the Entity List negatively impacts our ability to ship items subject to BIS regulations to these listed entities, we have determined that we are able to ship some SoC products to the listed entities in compliance with applicable law. Notwithstanding our ability to continue to supply some SoC products to the listed entities, these customers may seek to obtain similar or substitute products from our competitors that are not subject to these limitations, or to develop similar or substitute products themselves. We also cannot be certain what additional actions the U.S. government may take with respect to Hikvision, Dahua and Dajiang Baiwang, or our other China customers, including changes to the Entity List restrictions, export regulations, tariffs or other trade restrictions, or whether the Chinese government may take any actions in response to U.S. government action that may adversely affect our ability to do business with our China customers. Even in the absence of new restrictions, tariffs or trade actions imposed by the U.S. or Chinese government, our China customers may take actions to reduce dependence on the supply of components subject to U.S. trade regulations, including our SoC solutions, which could have a material adverse effect on our operating results. We are unable to predict the duration of the restrictions imposed by the U.S. government or of any additional governmental actions, any of which could have a long-term adverse effect on our business, operating results and financial condition.  

Global economic and political conditions, including possible trade tariffs and trade restrictions, may have an impact on our business and financial condition in ways that we currently cannot predict.

Our operations and performance depend significantly on global, regional and U.S. economic and geopolitical conditions. Beyond the BIS actions relating to Hikvision, Dahua and affiliates of Dajiang Baiwang, general trade tensions between the United States and China have been escalating, which has, in our view, created and will continue to create an uncertain business environment. If additional tariffs or trade restrictions are imposed on our SoC solutions or the products of our customers, or trade restrictions are imposed on our ability to conduct business with certain customers, there could be a negative impact on our operations and financial performance. For example, H.R. 5515 - John S. McCain National Defense Authorization Act for Fiscal Year 2019 negatively impacts Hikvision and Dahua’s ability to sell products into the U.S. security camera market and could decrease their demand for our solutions. Similarly, changes in export classification requirements, such as those proposed by U.S. Congress, could impact our ability to supply our solutions to certain companies or in certain countries.  Even in the absence of new restrictions, tariffs or changes in export classifications, it is possible that foreign customers could take actions to reduce dependence on the supply of components, including our solutions, that could be subject to new export classifications or trade restrictions. There are also risks that the Chinese government may, among other things, require the use of local suppliers, compel companies that do business in China to partner with local companies to conduct business and provide incentives to government-backed local customers to buy from local suppliers.  The materialization of these risks could have a material adverse effect on our business and financial condition.

37

Russia’s ongoing conflict with Ukraine has triggered significant sanctions from U.S. and European leaders. Resulting changes in U.S. trade policy could trigger retaliatory actions by Russia, its allies and other affected countries, including China, resulting in a trade war. Furthermore, if the conflict between Russia and Ukraine continues for a long period of time, or if other countries, including the U.S., become further involved in the conflict, we could face significant adverse effects to our business and financial condition. In addition, some of our customers and third-party partners have engineering teams located in Russian and/or Ukraine, whose operations have been and may continue to be disrupted by the ongoing conflict between the countries.  If such disruption were to continue for an extended period, our customers could face delays in the launch of new products containing our solutions, resulting in delayed or decreased demand for our solutions.

We have significant business operations in Taiwan, including approximately 350 employees, and many of our third-party manufacturing suppliers are located in Taiwan. Accordingly, our business, financial condition and results of operations may be affected by changes in governmental and economic policies in Taiwan, social instability and diplomatic and social developments in or affecting Taiwan due to its international political status. Although significant economic and cultural relations have been established between Taiwan and China, we cannot assure that relations between Taiwan and China will not face political or economic uncertainties in the future. Any deterioration in the relations between Taiwan and China, and other factors affecting military, political or economic conditions in Taiwan, could disrupt our business operations and materially and adversely affect our results of operations.

We are subject to governmental export and import controls that could subject us to liability or impair our ability to compete in international markets.

The U.S. and various foreign governments have imposed controls, export license requirements and restrictions on the import or export of certain products, technologies and software. We must export our products in compliance with U.S. export controls, including the Commerce’s Export Administration Regulations. We may not always be successful in obtaining necessary export licenses, and our failure to obtain required import or export approval for our products or limitations on our ability to export or sell our products imposed by these laws may harm both our international and domestic sales and adversely affect our revenue. Noncompliance with these laws could have negative consequences, including government investigations, penalties and reputational harm.

Changes in our products or changes in export, import and economic sanctions laws and regulations may delay our introduction of new products in international markets, prevent our customers from deploying our products internationally or, in some cases, prevent the export or import of our products to or from certain countries altogether. Any change in export or import regulations or legislation, shift or change in enforcement, or change in the countries, persons or technologies targeted by these regulations, could result in decreased use of our products by, or in our decreased ability to export or sell our products to, existing or potential customers with international operations.  In such event, our business and results of operations could be adversely affected.

We are subject to warranty and product liability claims and to product recalls.

From time to time, we are subject to warranty claims that may require us to make significant expenditures to defend these claims or pay damage awards. In the future, we may also be subject to product liability claims resulting from failure of our solutions or if products we design, manufacture, or sell, cause personal injury or property damage, even where the cause is unrelated to product defects. These risks will likely increase as our products are introduced into new devices, markets, or applications, including autonomous and semi-autonomous automotive, drone and robotic applications. In the event of a warranty claim, we may also incur costs if we compensate the affected customer. We maintain product liability insurance, but this insurance is limited in amount and subject to significant deductibles. There is no guarantee that our insurance will be available or adequate to protect against all claims. We also may incur costs and expenses relating to a recall of one of our customers’ products containing one of our devices. The process of identifying a recalled product in consumer devices that have been widely distributed may be lengthy and require significant resources, and we may incur significant replacement costs, contract damage claims from our customers and reputational harm. Costs or payments made in connection with warranty and product liability claims and product recalls could harm our financial condition and results of operations, as well as harm our reputation and cause the market value of our ordinary shares to decline.

38

We are subject to governmental laws, regulations and other legal obligations related to privacy and data protection.

The legislative and regulatory framework for privacy and data protection issues worldwide is rapidly evolving and is likely to remain uncertain for the foreseeable future. We collect personally identifiable information, or PII, and other data as part of our business processes and activities. This data is subject to a variety of U.S. and international laws and regulations, including oversight by various regulatory or other governmental bodies. Many foreign countries and governmental bodies, including China, the European Union and other relevant jurisdictions where we conduct business, have laws and regulations concerning the collection and use of PII and other data obtained from their residents or by businesses operating within their jurisdictions that are currently more restrictive than those in the U.S. For example, effective May 2018, the European Union adopted the General Data Protection Regulation that imposed more stringent data protection requirements and provided for greater penalties for noncompliance. Similarly, California has adopted the California Consumer Privacy Act of 2018, or CCPA, which took effect in 2020.  The CCPA gives California residents the right to access, delete and opt out of certain sharing of their information, and imposes penalties for failure to comply. In 2021, the National People’s Congress passed the Data Security Law of the People’s Republic of China (Data Security Law). The Data Security Law is the first comprehensive data security legislation in China and aims to regulate a wide range of issues in relation to the collection, storage, processing, use, provision, transaction and publication of any kind of data. Given its recent passage, there is significant uncertainty in how regulators will interpret and enforce the law, but it contains provisions that allow substantial government oversight and include fines for failure to obtain required approval from China’s cyber and data protection regulators for cross-border personal information-related data transfers. Any inability, or perceived inability, to adequately address privacy and data protection concerns, even if unfounded, or to comply with applicable laws, regulations, policies, industry standards, contractual obligations or other legal obligations, could result in additional cost and liability to us, damage our reputation and adversely affect our business.

Failure to comply with the U.S. Foreign Corrupt Practices Act, or FCPA, and similar laws associated with our activities outside of the United States could subject us to penalties and other adverse consequences.

We face significant risks if we fail to comply with the FCPA and other anti-corruption laws that prohibit improper payments or offers of payment to foreign governments and political parties by us for the purpose of obtaining or retaining business. In many foreign countries, particularly in countries with developing economies, it may be a local custom that businesses operating in such countries engage in business practices that are prohibited by the FCPA or other applicable laws and regulations. Although we implemented an FCPA compliance program, we cannot assure you that all of our employees and agents, as well as those companies to which we outsource certain of our business operations, will not take actions in violation of our policies and applicable law, for which we may be ultimately held responsible. Any violation of the FCPA or other applicable anti-corruption laws could result in severe criminal or civil sanctions and, in the case of the FCPA, suspension or debarment from U.S. government contracting, which could have a material and adverse effect on our reputation, business, financial condition, operating results and cash flows.

We, our customers and third-party contractors are subject to increasingly complex environmental regulations and compliance with these regulations may delay or interrupt our operations and adversely affect our business.

We face increasing complexity in our procurement, design, and research and development operations as a result of requirements relating to the materials composition of our products, including the European Union’s, or EU’s, Restriction on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, or RoHS, directive, which restricts the content of lead and certain other hazardous substances in specified electronic products put on the market in the EU and similar Chinese legislation relating to marking of electronic products which became effective in March 2007. Failure to comply with these and similar laws and regulations could subject us to fines, penalties, civil or criminal sanctions, contract damage claims, and take-back of non-compliant products, which could harm our business, reputation and operating results. The passage of similar requirements in additional jurisdictions or the tightening of these standards in jurisdictions where our products are already subject to such requirements could cause us to incur significant expenditures to make our products compliant with new requirements, or could limit the markets into which we may sell our products.

Our failure to comply with present and future environmental, health and safety laws could cause us to incur substantial costs, result in civil or criminal fines and penalties and decreased revenue, which could adversely affect our operating results. Failure by our foundry vendors or other suppliers to comply with applicable environmental laws and requirements could cause disruptions and delays in our product shipments, which could adversely affect our relations with our ODMs and OEMs and adversely affect our business and results of operations.

39

Regulations related to “conflict minerals” may force us to incur additional expenses, may make our supply chain more complex and may result in damage to our reputation with customers.

Pursuant to the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010, or the Dodd-Frank Act, the Securities and Exchange Commission, or the SEC, has adopted requirements for companies that use certain minerals and metals, known as conflict minerals, in their products, whether or not these products are manufactured by third parties. These requirements require companies to perform due diligence, disclose and report whether or not such minerals originate from the Democratic Republic of the Congo and adjoining countries. These requirements could adversely affect the sourcing, availability and pricing of minerals used in the manufacture of semiconductor devices, including our products. While these requirements continue to be subject to administrative uncertainty, we have incurred, and may continue to incur, costs to comply with the disclosure requirements, including costs related to determining the source of any of the relevant minerals and metals used in our products. Since our supply chain is complex, we may not be able to sufficiently verify the origins for these minerals and metals used in our products through the due diligence procedures that we implement, which may harm our reputation. In such event, we may also face difficulties in satisfying customers who require that all of the components of our products are certified as conflict mineral free.

We are subject to regulatory compliance requirements, including Section 404 of the Sarbanes-Oxley Act of 2002, which are costly to comply with, and our failure to comply with these requirements could harm our business and operating results.

We are subject to disclosure and compliance requirements associated with being a public company, including but not limited to compliance with Section 404 of the Sarbanes-Oxley Act of 2002. For example, Section 404 of the Sarbanes-Oxley Act requires that our management report on, and our independent auditors attest to, the effectiveness of our internal control structure and procedures for financial reporting. Compliance with Section 404 requires a significant amount of time, expenses and diversion of internal resources. If we or our auditors discover a material weakness in our internal controls, the disclosure of that fact, even if quickly remedied, could reduce the market’s confidence in our financial statements and harm our stock price. In addition, if we fail to maintain effective controls over financial reporting, we could be subject to sanctions or investigations by The NASDAQ Stock Market, the SEC, or other regulatory authorities. Irrespective of compliance with Section 404, any failure of our internal controls could have a material adverse effect on our stated results of operations and harm our reputation.  Furthermore, investor perceptions of our company may suffer, and this could cause a decline in the market price of our ordinary shares.

Changes in effective tax rates or adverse outcomes resulting from examination of our income tax returns could adversely affect our results.

Our future effective tax rates could be adversely affected if our earnings are lower than anticipated in countries where we have lower statutory rates and higher than anticipated in countries where we have higher statutory rates, by changes in the valuation of our deferred tax assets and liabilities, tax effects of share-based compensation, or by changes in tax laws, regulations, accounting principles or interpretations thereof. For example, changes in tax laws, including the U.S. federal tax legislation commonly referred to as the Tax Cuts and Jobs Act of 2017, or Tax Act, as well as other factors, could cause us to experience fluctuations in our tax obligations and effective tax rates and otherwise adversely affect our tax positions and/or our tax liabilities.

The Tax Act requires complex computations not previously provided in U.S. tax law. The U.S. Department of Treasury has broad authority to issue regulations and interpretative guidance that may significantly impact how we will apply the law and impact our results of operations in the period issued. As such, the application of accounting guidance for such items is currently uncertain. Further, compliance with the Tax Act and the accounting for such provisions require accumulation of information not previously required or regularly produced. While we have completed our accounting for the effects of the Tax Act, additional regulatory guidance may still be issued by the applicable taxing authorities which could materially affect our tax obligations and effective tax rate.

In addition, our income tax returns are subject to continuous examination by the Internal Revenue Service, or IRS, and other tax authorities. We regularly assess the likelihood of adverse outcomes resulting from these examinations to determine the adequacy of our provision for income taxes. We cannot assure you that the outcomes from these continuous examinations will not have an adverse effect on our operating results and financial condition.

40

Unfavorable tax law changes, an unfavorable governmental review of our tax returns, changes in our geographical earnings mix or imposition of withholding taxes on repatriated earnings could adversely affect our effective tax rate and our operating results.

Our operations are subject to certain taxes, such as income and transaction taxes, in the Cayman Islands, the United States, China, Hong Kong, Japan, Italy, South Korea, Taiwan and other jurisdictions in which we do business. A change in the tax laws in the jurisdictions in which we do business, including an increase in tax rates or an adverse change in the treatment of an item of income or expense, possibly with retroactive effect, could result in a material increase in the amount of taxes we incur. In particular, past proposals have been made to change certain U.S. tax laws relating to foreign entities with U.S. connections, which may include us. For example, previously proposed legislation has considered treating certain foreign corporations as U.S. domestic corporations (and therefore taxable on all of their worldwide income) if the management and control of the foreign corporation occurs, directly or indirectly, primarily within the United States. If such legislation were enacted, we could, depending on the precise form, be subject to U.S. taxation notwithstanding our domicile outside the United States. In addition, on October 5, 2015 the Organization for Economic Co-operation and Development, or OECD, which represents a coalition of member countries, released its final reports from the BEPS Action Plans. The final reports include recommendations covering a number of issues, including country-by-country reporting, permanent establishment rules, transfer pricing rules and tax treaties. These changes, which have been or are in the process of being adopted by numerous countries, could increase uncertainties and may adversely affect our provision for income taxes. In December 2018, the Cayman Islands passed the International Tax Co-Operation (Economic Substance) Law, 2018. Effective as of January 1, 2019, the new legislation requires Cayman Islands companies carrying one or more relevant activity to maintain a substantial economic presence in the Cayman Islands. Effective from December 31, 2019, we have structured our activities to comply with the new law. However, the legislation remains subject to further clarification and interpretation and accordingly, there is no guarantee that we will be deemed to be compliant. Furthermore, this legislation may require us to make additional changes to the activities we carry on in the Cayman Islands, which could increase our cost of operations, and we could be subject to penalties for lack of compliance. As a result, we are not able to determine the impact on our operations and net income as of the current period.

We are subject to periodic audits or other reviews by tax authorities in the jurisdictions in which we conduct our activities. Any such audit, examination or review requires management’s time, diverts internal resources and, in the event of an unfavorable outcome, may result in additional tax liabilities or other adjustments to our historical results.

Because we conduct operations in multiple jurisdictions, our effective tax rate is influenced by the amounts of income and expense attributed to each such jurisdiction. If such amounts were to change so as to increase the amounts of our net income subject to taxation in higher-tax jurisdictions, or if we were to commence operations in jurisdictions assessing relatively higher tax rates, our effective tax rate could be adversely affected. In addition, we may determine that it is advisable from time to time to repatriate earnings from subsidiaries under circumstances that could give rise to imposition of potentially significant withholding taxes by the jurisdictions in which such amounts were earned, without our receiving the benefit of any offsetting tax credits, which could also adversely impact our effective tax rate.

We may be classified as a passive foreign investment company which could result in adverse U.S. federal income tax consequences for U.S. holders of our ordinary shares.

Based on the current and anticipated valuation of our assets and the composition of our income and assets, we do not expect to be considered a passive foreign investment company, or PFIC, for U.S. federal income tax purposes for our 2022 fiscal year or the foreseeable future. However, a separate determination must be made at the close of each taxable year as to whether we are a PFIC for that taxable year, and we cannot assure you that we will not be a PFIC for our 2023 fiscal year or any future taxable year. Under current law, a non-U.S. corporation will be considered a PFIC for any taxable year if either (a) at least 75% of its gross income is passive income or (b) at least 50% of the value of its assets, generally based on an average of the quarterly values of the assets during a taxable year, is attributable to assets that produce or are held for the production of passive income. PFIC status depends on the composition of our assets and income and the value of our assets (which may be based in part on the value of our ordinary shares which may fluctuate), including, among others, a pro rata portion of the income and assets of each subsidiary in which we own, directly or indirectly, at least 25% by value of the subsidiary’s equity interests, from time to time. Because we currently hold, and expect to continue to hold, a substantial amount of cash or cash equivalents, and because the calculation of the value of our assets may be based in part on the value of our ordinary shares which may fluctuate and may fluctuate considerably given that market prices of technology companies historically often have been volatile, we may be a PFIC for any taxable year. If we were treated as a PFIC for any taxable year during which a U.S. holder held ordinary shares, certain adverse U.S. federal income tax consequences could apply for such U.S. holder.

41

Changes in our United States federal income tax classification, or that of our subsidiaries, could result in adverse tax consequences to our 10% or greater U.S. shareholders.

The Tax Act may have changed the consequences to U.S. shareholders that own, or are considered to own, as a result of the attribution rules, ten percent or more of the voting power or value of the stock of a non-U.S. corporation (a 10% U.S. shareholder) under the U.S. Federal income tax law applicable to owners of U.S. controlled foreign corporations, or CFCs. 

Prior to the Tax Act, we did not believe that we, or any of our non-U.S. subsidiaries, were considered a CFC, which is a determination made daily based on whether the 10% U.S. shareholders together own, or are considered to own under the attribution rules, more than fifty percent of the voting power or value of a non-U.S. corporation.  The Tax Act repealed Internal Revenue Code Section 958(b)(4), which, unless clarified in future regulations or other guidance, may result in classification of certain of the Company’s foreign subsidiaries as CFCs with respect to any single 10% U.S. shareholder. This may be the result without regard to whether 10% U.S. shareholders together own, directly or indirectly, more than fifty percent of the voting power or value of the Company as was the case under prior rules. The repeal is effective as of the last taxable year of CFCs beginning before January 1, 2018 and for the taxable year of 10% U.S. shareholders in which the CFCs' taxable year ends.

Risks Related to Our Intellectual Property

Our failure to adequately protect our intellectual property rights could impair our ability to compete effectively or defend ourselves from litigation, which could harm our business, financial condition and results of operations.

Our success depends, in part, on our ability to protect our intellectual property. We rely primarily on patent, copyright, trademark and trade secret laws, as well as confidentiality and non-disclosure agreements and other contractual protections, to protect our proprietary technologies and know-how, all of which offer only limited protection. The steps we have taken to protect our intellectual property rights may not be adequate to prevent misappropriation of our proprietary information or infringement of our intellectual property rights, and our ability to prevent such misappropriation or infringement is uncertain, particularly in countries outside of the United States. The failure of our patents to adequately protect our technology might make it easier for our competitors to offer similar products or technologies, which would harm our business. For example, our patents and patent applications could be opposed, contested, circumvented, designed around by our competitors or be declared invalid or unenforceable in judicial or administrative proceedings. Our foreign patent protection is generally not as comprehensive as our U.S. patent protection and may not protect our intellectual property in some countries where our products are sold or may be sold in the future. Many U.S.-based companies have encountered substantial intellectual property infringement in foreign countries, including countries where we sell products. Even if foreign patents are granted, effective enforcement in foreign countries may not be available. For example, the legal environment relating to intellectual property protection in certain emerging market countries where we operate is relatively weaker, often making it difficult to create and enforce such rights. We may not be able to effectively protect our intellectual property rights in these emerging markets or elsewhere. If such an impermissible use of our intellectual property or trade secrets were to occur, our ability to sell our solutions at competitive prices may be adversely affected and our business, financial condition, operating results and cash flows could be materially and adversely affected.

We may in the future need to initiate infringement claims or litigation in order to try to protect our intellectual property rights. Litigation, whether we are a plaintiff or a defendant, can be expensive, time-consuming and may divert the efforts of our technical staff and management, which could harm our business, whether or not such litigation results in a determination favorable to us. Litigation also puts our patents at risk of being invalidated or interpreted narrowly and our patent applications at risk of not being issued. Additionally, any enforcement of our patents or other intellectual property may provoke third parties to assert counterclaims against us. If we are unable to protect our proprietary rights or if third parties independently develop or gain access to our or similar technologies, our business, revenue, reputation and competitive position could be harmed.

Third parties’ assertions of infringement of their intellectual property rights could result in our having to incur significant costs and cause our operating results to suffer.

The semiconductor industry is characterized by vigorous protection and pursuit of intellectual property rights and positions, which has resulted in protracted and expensive litigation for many companies. Certain of our customers have received, and we expect, particularly to the extent we gain greater market visibility, that in the future we may receive, communications from others alleging our infringement of their patents, trade secrets or other intellectual property rights. In addition, certain of our end customers have been the subject of lawsuits alleging infringement of intellectual property rights by products incorporating our solutions, including the assertion that the alleged infringement may be attributable, at least in part, to our technology. Lawsuits resulting from such allegations could subject us to significant liability for damages and invalidate our proprietary rights, though this has not occurred to date. Any potential intellectual property litigation also could force us to do one or more of the following:

42

Any significant impairment of our intellectual property rights from any litigation we face could harm our business and our ability to compete.

Any potential dispute involving our patents or other intellectual property could affect our customers, which could trigger our indemnification obligations to them and result in substantial expense to us.

          In any potential dispute involving our patents or other intellectual property, our customers could also become the target of litigation. Certain of our customers have received notices from third parties claiming to have patent rights in certain technology and inviting our customers to license this technology, and certain of our end customers have been the subject of lawsuits alleging infringement of patents by products incorporating our solutions, including the assertion that the alleged infringement may be attributable, at least in part, to our technology. Because we generally indemnify our customers for intellectual property claims made against them for products incorporating our technology, any litigation could trigger technical support and indemnification obligations under some of our license agreements, which could result in substantial expense to us. Because some of our ODMs and OEMs are larger than we are and have greater resources than we do, they may be more likely to be the target of an infringement claim by third parties than we would be, which could increase our chances of becoming involved in a future lawsuit. If any such claims were to succeed, we might be forced to pay damages on behalf of our ODMs or OEMs that could increase our expenses, disrupt our ability to sell our solutions and reduce our revenue. In addition to the time and expense required for us to supply support or indemnification to our customers, any such litigation could severely disrupt or shut down the business of our customers, which in turn could hurt our relations with our customers and cause the sale of our products to decrease.

The use of open source software in our products, processes and technology may expose us to additional risks and compromise our proprietary intellectual property.

Our products, processes and technology sometimes utilize and incorporate software that is subject to an open source license. Open source software is typically freely accessible, usable and modifiable. Certain open source software licenses, such as the GNU General Public License, require a user who intends to distribute the open source software as a component of the user’s software to disclose publicly part or all of the source code to the user’s software. In addition, certain open source software licenses require the user of such software to make any derivative works of the open source code available to others on terms unfavorable to us or at no cost. This can subject previously proprietary software to open source license terms.

         While we monitor the use of open source software in our products, processes and technology and try to ensure that no open source software is used in such a way as to require us to disclose the source code to the related product, processes or technology when we do not wish to do so, such use could inadvertently occur. Additionally, if a third-party software provider has incorporated certain types of open source software into software we license from such third-party for our products, processes or technology, we could, under certain circumstances, be required to disclose the source code to our products, processes or technology. This could harm our intellectual property position and our business, results of operations and financial condition.

Risks Related to Ownership of Our Ordinary Shares

The market price of our ordinary shares may be volatile, which could cause the value of your investment to decline.

Since our initial public offering in October 2012, the market price of our ordinary shares has been highly volatile. The trading price of our ordinary shares is likely to remain volatile and could be subject to wide fluctuations in price in response to various factors, some of which are beyond our control. These factors include:

43

In addition, the stock market in general, and the market for semiconductor and other technology companies in particular, have experienced extreme price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of those companies. These broad market and industry factors may cause the market price of our ordinary shares to decrease, regardless of our actual operating performance. These trading price fluctuations may also make it more difficult for us to use our ordinary shares as a means to make acquisitions or to use options to purchase our ordinary shares to attract and retain employees. If the market price of our ordinary shares declines, you may not realize any return on your investment in us and may lose some or all of your investment. In addition, in the past, following periods of volatility in the overall market and the market price of a company’s securities, securities class action litigation has often been instituted against these companies. This litigation, if instituted against us, could result in substantial costs and a diversion of our management’s attention and resources.

Our actual operating results may not meet or exceed our guidance and investor expectations, which would likely cause our stock price to decline.

From time to time, we may release guidance in our earnings releases, earnings conference calls or otherwise, regarding our future performance that represent our management’s estimates as of the date of release. If given, this guidance, which will include forward-looking statements, will be based on projections prepared by our management. Projections are based upon a number of assumptions and estimates that, while presented with numerical specificity, are inherently subject to significant business, economic and competitive uncertainties and contingencies, many of which are beyond our control. The principal reason that we expect to release guidance is to provide a basis for our management to discuss our business outlook with analysts and investors. With or without our guidance, analysts and other investors may publish expectations regarding our business, financial performance and results of operations. We do not accept any responsibility for any projections or reports published by any such third persons.

Guidance is necessarily speculative in nature, and it can be expected that some or all of the assumptions of the guidance furnished by us will not materialize or will vary significantly from actual results. If our actual performance does not meet or exceed our guidance or investor expectations, the trading price of our ordinary shares is likely to decline.

The price of our ordinary shares could decrease as a result of shares being sold in the market.

Sales of a substantial number of our ordinary shares in the public market, or the perception that these sales might occur, could cause the market price of our ordinary shares to decline. In the past, we have issued stock options to employees and we regularly issue restricted stock units (RSUs) to employees, which settle as ordinary shares upon vesting. These shares can be freely sold in the public market upon issuance and vesting, subject to restrictions provided under the terms of the applicable plan and/or the option agreements entered into with option holders. We may also issue ordinary shares or securities convertible into ordinary shares from time to time in connection with a financing, acquisition or otherwise. Any such issuance could result in substantial dilution to our existing shareholders and cause the trading price of our stock to decline.

44

We do not intend to pay dividends on our ordinary shares and, consequently, a shareholder’s ability to achieve a return on its investment will depend on appreciation in the price of our ordinary shares.

We have never declared or paid any cash dividends on our ordinary shares and do not currently intend to do so for the foreseeable future. We currently intend to invest our future earnings, if any, to fund our growth. Therefore, shareholders are not likely to receive any dividends on their ordinary shares for the foreseeable future and the success of an investment in our ordinary shares will depend upon any future appreciation in their value. There is no guarantee that our ordinary shares will appreciate in value or even maintain the price at which our shareholders have purchased their shares. Investors seeking cash dividends should not purchase our ordinary shares.

Provisions of our memorandum and articles of association and Cayman Islands corporate law may discourage or prevent an acquisition of us which could adversely affect the value of our ordinary shares.

Provisions of our memorandum and articles of association and Cayman Islands law may have the effect of delaying or preventing a change of control or changes in our management. These provisions include the following:

Holders of our ordinary shares may face difficulties in protecting their interests because we are incorporated under Cayman Islands law.

Our corporate affairs are governed by our amended and restated memorandum and articles of association, by the Companies Law (as the same may be supplemented or amended from time to time) of the Cayman Islands and by the common law of the Cayman Islands. The rights of our shareholders and the fiduciary responsibilities of our directors under Cayman Islands law are not as clearly established as under statutes or judicial precedent in existence in jurisdictions in the United States. In particular, the Cayman Islands has a less developed body of securities laws than the United States and provides significantly less protection to investors. There is no legislation specifically dedicated to the rights of investors in securities and thus no statutorily defined private cause of action specific to investors such as those provided under the Securities Act or the Securities Exchange Act of 1934, as amended. In addition, shareholders of Cayman Islands companies may not have standing to initiate shareholder derivative actions in U.S. federal courts. Therefore, you may have more difficulty in protecting your interests in the face of actions by our management, directors or controlling shareholders than would shareholders of a corporation incorporated in a jurisdiction in the United States due to the comparatively less developed nature of Cayman Islands law in this area.

Shareholders of Cayman Islands exempted companies, such as our company, have no general rights under Cayman Islands law to inspect corporate records and accounts or to obtain copies of lists of shareholders of the company. Our directors have discretion under our articles of association to determine whether or not, and under what conditions, our corporate records may be inspected by our shareholders, but are not obliged to make them available to our shareholders. This may make it more difficult for you to obtain the information needed to establish any facts necessary for a shareholder motion or to solicit proxies from other shareholders in connection with a proxy contest.

Subject to limited exceptions, under Cayman Islands law, a minority shareholder may not bring a derivative action against the board of directors.

45

Holders of our ordinary shares may have difficulty obtaining or enforcing a judgment against us because we are incorporated under the laws of the Cayman Islands.

It may be difficult or impossible for you to bring an action against us in the Cayman Islands if you believe your rights have been infringed under U.S. securities laws. There is no statutory recognition in the Cayman Islands of judgments obtained in the United States, although the courts of the Cayman Islands will in certain circumstances recognize and enforce a non-penal judgment of a foreign court of competent jurisdiction without retrial on the merits. While there is no binding authority on this point, this is likely to include, in certain circumstances, a non-penal judgment of a United States court imposing a monetary award based on the civil liability provisions of the U.S. federal securities laws. The Grand Court of the Cayman Islands may stay proceedings if concurrent proceedings are being brought elsewhere. There is uncertainty as to whether the Grand Court of the Cayman Islands would recognize or enforce judgments of United States courts obtained against us predicated upon the civil liability provisions of the securities laws of the United States or any state thereof and whether the Grand Court of the Cayman Islands would hear original actions brought in the Cayman Islands against us predicated upon the securities laws of the United States or any state thereof.

General Risk Factors

If our operations are interrupted, our business and reputation could suffer.

Our operations and those of our manufacturers are vulnerable to interruption caused by technical breakdowns, computer hardware and software malfunctions, software viruses, infrastructure failures, regional health issues and pandemics, earthquakes, fires, severe storms, floods and other negative impacts from climate change, power losses, telecommunications failures, terrorist attacks, wars, Internet failures and other events beyond our control. Any disruption in our services or operations could result in a reduction in revenue or a claim for substantial damages against us, regardless of whether we are responsible for that failure. The outbreak of COVID-19 has resulted in significant governmental measures being implemented to control the spread of the virus, including, among others, restrictions on travel, manufacturing and the movement of employees in many regions of the world, and the imposition of remote or work from home conditions in many of our offices, including the United States and Italy. If the remote or work from home conditions continue for an extended period of time, or similar restrictions and measures are implemented in more of the locations where we have offices, we may experience delays in product development, a decreased ability to support our customers, reduced design win activity, and overall lack of productivity. We rely on our computer equipment, database storage facilities and other office equipment, which are located primarily in the seismically active San Francisco Bay Area and Taiwan. If we suffer a significant database or network facility outage, our business could experience disruption until we fully implement our back-up systems.

If securities analysts or industry analysts downgrade our ordinary shares, publish negative research or reports or fail to publish reports about our business, our stock price and trading volume could decline.

The trading market for our ordinary shares will be influenced by the research and reports that industry or securities analysts publish about us, our business and our market. If one or more analysts adversely changes their recommendation regarding our stock or our competitors’ stock, our stock price would likely decline. If one or more analysts cease coverage of us or fail to regularly publish reports on us, we could lose visibility in the financial markets which in turn could cause our stock price or trading volume to decline.

None.

Our corporate headquarters are located in Santa Clara, California. These facilities accommodate our sales, marketing, research and development, finance, and administration activities. Outside of Santa Clara, California, we lease some facilities in other U.S. locations that are used for research and development and marketing activities. Outside of the United States, we also lease facilities in various international locations that are used for research and development, sales, business development, operations and administrative support. These international facilities are mainly located in Taiwan, China and Italy. Our lease obligations primarily consist of operating leases with lease periods expiring between fiscal years 2023 to 2028.

46

We believe that our existing facilities are well maintained and in good operating condition, and are sufficient for our needs for the foreseeable future. The following table lists our major locations and primary usage as of January 31, 2022:

We are not engaged in any material legal proceedings at this time.

Not applicable.

47

PART II

Market Information

Our ordinary shares have been traded on the NASDAQ Global Market under the symbol “AMBA” since October 10, 2012. On March 24, 2022, there were 29 shareholders of record holding our ordinary shares. We cannot estimate the number of beneficial owners since many brokers and other institutions hold our shares on behalf of shareholders.

Share Performance Graph

This performance graph shall not be deemed to be “soliciting material” or “filed” or incorporated by reference in future filings with the Securities and Exchange Commission, or subject to the liabilities of Section 18 of the Securities Exchange Act of 1934, as amended, or the Exchange Act, except as shall be expressly set forth by specific reference in such filing.

The following graph shows a comparison from February 1, 2017 through January 31, 2022 of the cumulative total return for our ordinary shares, the NASDAQ Composite Index and the Philadelphia Semiconductor Index. The comparisons in the graph are historical and are not intended to forecast or be indicative of possible future performance of our ordinary shares.

Comparison of 5 year Cumulative Total Return

Dividends

We have never declared or paid any cash dividends on our ordinary shares and do not currently intend to do so in the foreseeable future.

Securities Authorized for Issuance under Equity Compensation Plans

For information about our equity compensation plans, see Note 12, “Employee Benefits and Stock-based Compensation” of the Notes to Consolidated Financial Statements included in this report.

48

Purchases of Equity Securities by the Issuer

On May 29, 2019, our Board of Directors authorized a program to repurchase up to $50.0 million of our ordinary shares through June 30, 2020. On March 16, 2020, the Company repurchased a total of 25,719 shares for approximately $1.0 million in cash. On May 29, 2020, the Board approved an extension of this program through June 30, 2021. On May 25, 2021, the Board extended the repurchase program through June 30, 2022. As of January 31, 2022, $49.0 million was available for repurchases through June 30, 2022. Since the inception of the Company’s repurchase programs in June 2016, a total of $275.0 million has been authorized, and a total of 4,011,595 shares have been repurchased for approximately $175.8 million in cash. Repurchases may be made from time-to-time through open market purchases, 10b5-1 plans or privately negotiated transactions subject to market conditions, applicable legal requirements and other relevant factors. The repurchase program does not obligate us to acquire any particular amount of ordinary shares, and it may be suspended at any time at our discretion. The repurchase program is funded using our working capital and any repurchased shares are recorded as authorized but unissued shares.

Recent Sales of Unregistered Securities

None.

49

50

Overview

We are a leading developer of low-power system-on-a-chip, or SoC, semiconductors providing powerful artificial intelligence, or AI, processing, advanced image signal processing and high-resolution video compression. Since inception, we have primarily served human viewing applications with video and image processors for enterprise, public infrastructure and home applications, such as internet protocol, or IP, security cameras, sports cameras, wearables, aerial drones, and aftermarket automotive video recorders. In the last several years, our development efforts have focused on creating advanced AI technology that enables edge devices to visually perceive the environment and make decisions based on the data collected from cameras and, most recently, other types of sensors. This category of AI technology is known as computer vision, or CV, and our CV SoCs integrate our state-of-the-art video processor technology together with our deep learning neural network processing technology, which we refer to as CVflow™. The CVflow-architecture supports a variety of CV algorithms, including object detection, classification and tracking, semantic and instance segmentation, image processing, stereo object detection, terrain mapping, and face recognition. CVflow can process other sensor modalities including lidar and radar, and allows customers to differentiate their products by porting their own, or third party, neural networks and/or classical CV algorithms to our CVflow-based SoCs. Our SoC designs fully integrate AI, computer vision functionality, HD video processing, image processing, audio processing, and system functions onto a single chip, delivering exceptional video and image quality at high compression rates, differentiated functionality and low power consumption. These CV-based technologies are allowing us to address a broader range of markets and applications requiring AI video features, including IP security cameras, a variety of automotive cameras, consumer cameras, and industrial and robotic markets and applications. We anticipate that our CV technology will also enable us to capture more content per electronic system.

Our development efforts are focused on SoCs that provide both human viewing and computer vision functionality. As a result, we believe that our future revenue growth, if any, will significantly depend upon our ability to expand within camera markets with our AI and computer vision technology, particularly in the professional IP security and home security and monitoring camera markets, as well as emerging markets such as AI-enabled security cameras, AI-based driving applications, including driver monitoring systems, advanced blind spot detection, object detection, and deep learning algorithms for HD mapping solutions, OEM automotive advanced driver assistance systems, or ADAS, applications, and industrial and robotics markets. We expect our research and development expenditures to increase in comparison to prior periods as we devote additional resources to the development of innovative video and image processing solutions with increased functionality, such as AI and CV capabilities, and as we target new markets.

We sell our SoC solutions to leading original design manufacturers, or ODMs, and OEMs globally, and in the automotive market, we also sell to Tier-1 suppliers. We refer to ODMs and Tier-1 automotive suppliers as our customers and OEMs as our end customers, except as otherwise indicated or as the context otherwise requires.

Our sales cycles typically require a significant investment of time and a substantial expenditure of resources before we can realize revenue from the sale of our solutions, if any. Our typical sales cycle consists of a multi-month sales and development process involving our customers’ system designers and management and our sales personnel and software engineers. If successful, this process culminates in a customer’s decision to use our solutions in its system, which we refer to as a design win. Our sales efforts are typically directed to the OEM of the product that will incorporate our video and image processing solution, but the eventual design and incorporation of our SoC into the product may be handled by an ODM or Tier-1 supplier on behalf of the OEM.

Volume production may begin within 9 to 18 months after a design win, depending on the complexity of our customer’s product and other factors upon which we may have little or no influence. In general, design cycles will be longer in the OEM automotive and industrial and robotics markets than in the IP security and consumer device markets. Once our solutions have been incorporated into a customer’s design, they are likely to be used for the life cycle of the customer’s product. Conversely, a design loss to a competitor will likely preclude any opportunity for future revenue from such customer’s product. Even if we obtain a design win and our SoC remains a component through the life cycle of a customer’s product, the volume and timing of actual sales of our SoCs to the customer depend upon the production, release and market acceptance of that product, none of which are within our control. A portable consumer device typically has a product life cycle of 6 to 18 months, while an IP security camera typically has a product life cycle of 12 to 24 months. We anticipate that product lifecycles will typically be longer than 24 months in the OEM automotive and industrial and robotics markets, as new product introductions occur less frequently in these markets.

51

Fiscal Year 2022 Financial Highlights and Trends

Factors Affecting Our Performance

Spread of COVID-19 Could Adversely Affect our Business in a Material Way. The COVID-19 pandemic has resulted in significant governmental measures being implemented to control the spread of the virus, including, among others, restrictions on travel and the imposition of remote or work from home conditions in many of the locations where we have offices. While we have not yet experienced a significant disruption of our operations as a result of the COVID-19 pandemic, if the remote or work from home conditions in any of our locations continues for an extended period of time, we may experience delays in product development, a decreased ability to support our customers, reduced design win activity, and overall lack of productivity. We are experiencing significantly longer manufacturing times that, if they persist or worsen, could impact our ability to meet our customers’ demand for our solutions and negatively impact our revenue. As a result of these factors we have increased our inventory levels in the near term. Moreover, if there is a significant COVID-19 outbreak that impacts Samsung Electronic Corporation’s ability to manufacture our SoCs or our third-party contractors’ ability to assemble, test and ship our products, we could experience delays or reductions in our ability to ship products to our customers. The pandemic may also impact our customers’ ability to manufacture their products, support their customers or reduce or delay demand for their products, which could, in turn, reduce such demand for our solutions. While we cannot quantify specific impacts of the COVID-19 pandemic or actions taken by governments and businesses in response thereto, our results of operations and financial condition may be negatively affected if we encounter significant supply chain problems, reductions in demand due to our customers or end customers having problems, or other unexpected COVID-19 ramifications.

52

Ability to Capitalize on AI and Computer Vision Trends. We expect that AI and computer vision functionality will become an increasingly important requirement in many of our current and future markets, including IP security, automotive, industrial and robotics, and certain consumer markets. As a result, we believe that our ability to develop advanced AI computer vision technology, enable and support customer product development in emerging applications, such as ADAS, advanced blind spot detection, object detection, classification and tracking, people recognition, retail analytics, and machine learning, and gain customer acceptance of our technology platform and solutions will be critical to our future success. Moreover, achieving design wins, particularly for computer vision-centric applications in the IP security, automotive, industrial and robotics markets, is vital to our ability to generate revenue growth. As such, we closely monitor design wins by customer and end market. However, a design win may not successfully materialize into revenue, and even if it does result in revenue, the amount generated by each design win can vary significantly.

Ability to Develop and Introduce New or Enhanced Solutions. We operate in a dynamic environment characterized by rapidly changing technologies and technological obsolescence. To compete successfully, we must design, develop, market and sell enhanced solutions with increased levels of performance and functionality that meet the expectations of our customers. As such, we continuously invest in our research and development projects, especially AI and computer vision technologies. However, failure to anticipate or timely develop new or enhanced solutions in response to technology shifts and trends could result in decreased revenue and our competitors achieving design wins we sought. Moreover, any reliability or quality problems with our solutions could harm our reputation, increase additional development and replacement costs, and prevent us from retaining existing customers and attracting new customers.

Pricing, Product Cost and Margin. Our pricing and margins depend on the volumes and features of the solutions we provide to our customers. Additionally, we make significant investments in new solutions for both cost improvements and new features that we expect to drive revenue and maintain margins. In general, solutions incorporated into more complex configurations, such as those used in high-performance camera applications or, in the future, advanced driver assistance systems, have higher prices and higher gross margins as compared to solutions sold into lower-performing, more competitive camera applications. Our average selling price can vary by market and application due to market-specific supply and demand, the maturation of products launched in previous years and the launch of new products by us or our competitors.

We continually monitor the cost of our solutions. As we rely on third-party manufacturers for the manufacture of our products, we maintain a close relationship with these suppliers to continually monitor production yields, component costs and design efficiencies.

Shifting Consumer Preferences. Our revenue is also subject to consumer preferences, regarding form factor and functionality, and how those preferences impact the video and image capture electronics that we support. For example, improved smartphone video capture capabilities led to the decline of video cameras aimed at the video and image capture market. The current video and image capture market is now characterized by a greater volume of more specialized video and image capture devices that are less likely to be replaced with smartphones, such as wearable, IP security, aerial drone and automotive cameras. This increasing specialization of video capture devices has changed our customer base and end markets and has impacted our revenue. In the future, we expect further changes will continue to impact our business performance in those markets.

Continued Concentration of Revenue by End Market. Historically, our revenue has been significantly concentrated in a small number of end markets and we developed technologies to provide solutions for new markets as they emerged, such as the sports camera, IP security, aerial drone and automotive video recorder camera markets. Since fiscal year 2018, the professional and consumer IP security camera markets and automotive markets, including the OEM and aftermarket video recorder market, have been our largest end markets and sales into these markets collectively generated the majority of our revenue. We believe, however, that continued expansion into new markets is required to facilitate revenue growth and customer diversification. We have recently introduced solutions to address emerging applications and markets, such as the incorporation of AI and computer vision functionalities for AI-enabled security cameras, AI-based driving applications and industrial and robotics markets. While we will continue to seek to expand our end market exposure, we anticipate that sales to a limited number of end markets will continue to account for a significant percentage of our total revenue for the foreseeable future. Our end market concentration may cause our financial performance to fluctuate significantly from period to period based on the success or failure of products that our SoCs are designed into as well as the overall growth or decline in the video capture markets in which we compete. In addition, we derive a significant portion of our revenue from a limited number of ODMs who build products on behalf of a limited number of OEMs and from a limited number of OEMs to whom we ship directly. We believe that our operating results for the foreseeable future will continue to depend on sales to a relatively small number of customers.

53

Ability to Capitalize on Connectivity Trends. Mobile connected devices are ubiquitous today and play an increasingly prominent role in consumers’ lives. The constant connectivity provided by these devices has created a demand for connected electronic peripherals such as video and image capture devices. Our ability to capitalize on these trends by supporting our end customers in the development of connected peripherals that seamlessly cooperate with other connected devices and allow consumers to distribute and share video and images with online media platforms is critical for our success. We incorporate wireless communication functionality into our solutions for wearable, IP security, aerial drone and automotive video recorder cameras. The combination of our compression technology with wireless connectivity enables wireless video streaming and uploading of videos and images to the Internet. Our solutions enable IP security camera systems to stream video content to either cloud infrastructure or connected mobile devices, and our solutions for wearable and aerial drone cameras allow consumers to quickly stream or upload video and images to social media platforms.

Sales Volume. A typical design win that successfully launches into the marketplace can generate a wide range of sales volumes for our solutions, depending on the end market demand for our customers’ products. Our ability to accurately forecast demand can be adversely affected by a number of factors, including the reputation of the end customer, market penetration, product capabilities, size of the end market that the product addresses, our end customers’ ability to sell their products, miscalculations by our customers of their inventory requirements, changes in market conditions, adverse changes in our product order mix and fluctuating demand for our customers’ products. In certain cases, we may provide volume discounts on sales of our solutions, which may be offset by lower manufacturing costs related to higher volumes. In general, our customers with greater market penetration and better branding tend to develop products that generate larger volumes over the product life cycle.

Customer Product Life Cycle. We estimate our customers’ product life cycles based on the customer, type of product and end market. We typically commence commercial shipments from 9 to 18 months following a design win; however, in some markets, lengthier product and development cycles are possible, depending on the scope and nature of the project, such as in the automotive OEM market. A portable consumer device typically has a product life cycle of 6 to 18 months, and an IP security camera typically has a product life cycle of 12 to 24 months. We anticipate that product development and product life cycles will typically be longer than 24 months in the OEM automotive, Tier-1 automotive suppliers and robotics markets, as new product introductions typically occur less frequently in these markets.

Results of Operations

The following table sets forth our historical operating results for the periods indicated:

54

The following table sets forth our historical operating results as a percentage of revenue of each line item for the periods indicated:

Revenue

We derive substantially all of our revenue from the sale of HD and Ultra HD video and image processing SoC solutions to IP security camera OEMs, IP security camera ODMs, OEM automotive or Tier-1 automotive suppliers, and consumer camera OEMs, either directly or through our distributors. In recent years, our SoC solutions have been primarily used in camera markets, such as IP security, automotive video recorder, drone and wearable cameras. Although we expect these camera markets, in particular the IP security and automotive video recorder markets, to continue to generate revenue for the foreseeable future, we have recently introduced new SoCs targeting emerging AI and computer vision applications in the IP security camera, OEM automotive, industrial and robotics markets. We derive a substantial portion of our revenue from sales made indirectly through one of our distributors, WT Microelectronics Co., Ltd., formerly Wintech Microelectronics Co., Ltd., or Wintech, and directly to one of our ODM customers, Chicony Electronics Co., Ltd., or Chicony.

We have historically experienced seasonal fluctuations in our quarterly revenue with our third fiscal quarter normally being a higher revenue quarter. This fluctuation has been driven primarily by increased sales in IP security and consumer camera markets as our customers build inventories in preparation for the holiday shopping season. As we transition away from consumer markets, seasonal impact has decreased. Our average selling prices fluctuate based on the mix of our solutions sold in a period which reflects the impact of both changes in unit sales of existing solutions as well as the introduction and sales of new solutions. Our solutions are typically characterized by a life cycle that begins with higher average selling prices and lower volumes, followed by broader market adoption, higher volumes and average selling prices that are lower than initial levels.

The end markets into which we sell our products have seen significant changes as consumer preferences have evolved in response to new technologies. As a result, the composition and timing of our revenue may differ meaningfully during periods of technology or consumer preference changes. We expect shifts in consumer use of video capture to continue to change over time, as AI and computer vision specialized use cases emerge and video capture continues to proliferate.

Cost of Revenue and Gross Margin

Cost of revenue includes the cost of materials, such as wafers processed by third-party foundries, costs associated with packaging, assembly and testing, and our manufacturing support operations, such as logistics, planning and quality assurance. Cost of revenue also includes indirect costs, such as warranty, inventory valuation reserves, amortization of developed technology and other general overhead costs.

We expect that our gross margin may fluctuate from period to period as a result of changes in customer mix, average selling price, product mix and the introduction of new products by us or our competitors. In general, solutions incorporated into more complex configurations, such as those used in high-performance cameras, and in future advanced automotive OEM applications, have had or are expected to have higher prices and higher gross margins, as compared to solutions sold into the lower-performance, more competitive camera applications. As semiconductor products mature and unit volumes sold to customers increase, their average selling prices typically decline. These declines may be paired with improvements in manufacturing yields and lower wafer, packaging and test costs, which offset some of the margin reduction that could result from lower selling prices.

55

Research and Development

Research and development expense consists primarily of personnel costs, including salaries, stock-based compensation and employee benefits. The expense also includes costs of development incurred in connection with our collaborations with our foundry vendors, costs of licensing intellectual property from third parties for product development, costs of development for software and hardware tools, costs of fabrication of mask sets for prototype products, equipment expenses, outside services and allocated depreciation and facility expenses, net of any research and development grants. All research and development costs are expensed as incurred. We expect our research and development expense to increase in absolute dollars as we continue to enhance and expand our product features and offerings and increase headcount for new SoC development and development of computer vision technology, especially for the OEM automotive market.

Selling, General and Administrative

Selling, general and administrative expense consists primarily of personnel costs, including salaries, stock-based compensation and employee benefits for our sales, marketing, finance, human resources, information technology and administrative personnel. The expense also includes amortization of trade name and customer relationships, professional service costs related to accounting, tax, legal services, and allocated depreciation and facility expenses. We expect our selling, general and administrative expense to increase in absolute dollars as we continue to maintain the infrastructure and expand the size of our sales and marketing organization to support our business strategy of addressing new opportunities with our computer vision technology.

Other Income, Net

Other income, net, consists primarily of interest and other income from debt security investments and cash deposits with financial institutions.

Provision (Benefit) for Income Taxes

We are incorporated and domiciled in the Cayman Islands and also conduct business in several countries such as the United States, China, Taiwan, Hong Kong, Italy, South Korea, Germany, and Japan, and we are subject to taxation in those jurisdictions. Our worldwide operating income is subject to varying tax rates, and our effective tax rate is highly dependent upon the geographic distribution of our earnings or losses and the tax laws and regulations in each geographical region. It is also subject to fluctuation from changes in the valuation of our deferred tax assets and liabilities; tax benefits from excess stock-based compensation deductions; transfer pricing adjustments and the tax effects of nondeductible compensation. We have historically had lower effective tax rates as a substantial percentage of our operations are conducted in lower-tax jurisdictions. If our operational structure was to change in such a manner that would increase the amount of operating income subject to taxation in higher-tax jurisdictions, or if we were to commence operations in jurisdictions assessing relatively higher tax rates, our effective tax rate could fluctuate significantly on a quarterly basis and/or be adversely affected.

Significant judgment is required in evaluating our uncertain tax positions and determining our provision for income taxes. Although we believe our reserves are reasonable, no assurance can be given that the final tax outcome of these matters will not be different from that which is reflected in our historical provision for income taxes and accruals. We adjust these reserves in light of changing facts and circumstances, such as the closing of a tax audit or the refinement of an estimate. To the extent that the final tax outcome of these matters is different than the amounts recorded, such differences will impact the provision for income taxes in the period in which such determination is made. The provision for income taxes includes the impact of uncertain tax position reserves and changes to reserves that are considered appropriate, as well as the related net interest and penalties.

Significant judgment is also required in determining any valuation allowance recorded against deferred tax assets. In assessing the need for a valuation allowance, we consider all available evidence, including past operating results, estimates of future taxable income, and the feasibility of tax planning strategies. In the event that we change our determination as to the amount of deferred tax assets that can be realized, we will adjust our valuation allowance with a corresponding impact to the provision for income taxes in the period in which such determination is made.

56

Comparison of the Fiscal Years Ended January 31, 2022, 2021 and 2020

Revenue

Revenue increased for fiscal year 2022, as compared to fiscal year 2021, primarily due to continued adoption of our CV-based solutions in the IP security and automotive camera markets. In the professional IP security camera market, despite lower demand from our two largest China customers, strong growth in the Asia and North America regions together with continued sales penetration into the Europe region, resulted in a significant revenue increase in this market. In the home IP security camera market, revenue growth continued to be led by the North America region. A recovery in the automotive OEM and aftermarket applications in the Asia region, as well as continued adoption of our SoCs for automotive fleet applications, contributed an increase in revenue in the automotive markets. The increased revenue from IP security and automotive camera markets was partially offset by decreased revenue in the consumer camera markets.

Revenue decreased for fiscal year 2021, as compared to fiscal year 2020, primarily due to lower revenue from the professional IP security camera and automotive markets. In the professional IP security camera market, despite continued growth in the North America and Asia regions in fiscal year 2021, lower demand from our two largest China customers caused by higher inventory build-up in fiscal year 2020 and escalated trade tensions between the United States and China, together with less demand from the Europe region, resulted in a significant revenue decrease in this market. The decreased revenue in the automotive markets was primarily due to an overall slowdown in the automotive industry. The decreased revenue was partially offset by increased revenue in the consumer IP security camera and consumer markets, including drone and wearable camera markets. In the consumer IP security camera market, revenue growth continued to be led by the home security and monitoring market in the North America region. In the consumer markets, incorporation of our solutions into newly launched products from DJI resulted in a ramp of SoC shipments in the third quarter of fiscal year 2021, partially offset by decreased revenue in the sports camera market.

Cost of Revenue and Gross Margin

Cost of revenue increased for fiscal year 2022, as compared to fiscal year 2021, primarily due to increased revenue.

Cost of revenue decreased for fiscal year 2021, as compared to fiscal year 2020, primarily due to lower volumes of SoC shipments in the professional IP security camera and automotive markets offset by higher volumes in the consumer IP security camera, drone and wearable markets.

Gross margin increased in fiscal year 2022, as compared to fiscal year 2021, primarily due to an increase in the percentage of our total revenue that was derived from the higher gross margin automotive markets. Customer concentration shift from the China region to Asia region other than China and to the North America region in the professional IP security camera market also contributed to an improvement in gross margin in fiscal year 2022.

Gross margin increased in fiscal year 2021, as compared to fiscal year 2020, primarily due to a lower percentage of our total revenue coming from the professional IP security camera market at lower average selling prices.  

57

Research and Development

Research and development expense increased for fiscal year 2022, as compared to fiscal year 2021, primarily due to increased personnel costs and engineering related costs. In fiscal year 2022, personnel costs increased by approximately $23.7 million as a result of issuance of stock awards, employee benefit programs and an increase in headcount. Our engineering headcount increased to 671 at January 31, 2022, including 44 engineering headcount added from our acquisition of Oculii, compared to 582 at January 31, 2021. Engineering related costs, including equipment expense, outside service and facility related expenses in support of new SoCs and related software, increased by approximately $7.5 million. The increase was partially offset by decreased SoC development costs due to the timing and number of chips in development. In fiscal year 2022, SoC development costs decreased by approximately $4.4 million.

Research and development expense increased for fiscal year 2021, as compared to fiscal year 2020, primarily due to a $6.2 million increase in SOC development costs as our projects move to the 5nm process node and approximately $4.3 million of research and development grants from a foreign government that ended in fiscal year 2020. Our engineering headcount also increased to 582 at January 31, 2021 compared to 563 at January 31, 2020, which resulted in an increase in salary-related expenses of approximately $2.8 million in fiscal year 2021. The increased research and development expense was also attributable to additional stock-based compensation expense of approximately $1.2 million in fiscal year 2021, as a result of the issuance of stock to newly hired employees, our annual evergreen stock program for existing employees, and our annual bonus program. The increases were partially offset by approximately $3.4 million lower travel, facility and professional service related expenses.

Selling, General and Administrative

Selling, general and administrative expense increased for fiscal year 2022, as compared to fiscal year 2021, primarily due to increased personnel costs and professional services in support of the Oculii acquisition and business development in the IP security, automotive and robotics markets. In fiscal year 2022, personnel costs increased by approximately $11.7 million as a result of issuance of stock awards, employee benefit programs and an increase in headcount. The increase was also attributable to approximately $3.8 million of acquisition-related costs associated with the acquistion of Oculii in fiscal year 2022.

Selling, general and administrative expense increased for fiscal year 2021, as compared to fiscal year 2020, primarily due to additional stock-based compensation expense of approximately $2.1 million as a result of the issuance of stock to newly hired employees, our annual evergreen stock program for existing employees, and our annual bonus program. The increase was also attributable to increased headcount to support our business development in IP security, automotive OEM and robotics markets, which resulted in an increase in salary-related expenses of approximately $1.1 million in fiscal year 2021. Increases of approximately $2.0 million for facility and professional service expenses were largely offset by $1.9 million lower spending for travel and trade show related expenses.

Other Income, Net

58

The decrease in other income, net, for fiscal year 2022, as compared to fiscal year 2021, was primarily due to lower yields from our debt security investments as a result of full liquidation of the investments in fiscal year 2022 to finance the acquisition of Oculii. The decrease was also attributable to net loss from foreign currency transactions and remeasurements due to fluctuations in exchange rates.

The decrease in other income, net, for fiscal year 2021, as compared to fiscal year 2020, was primarily due to lower interest and other income from our deposits and debt security investments. The decrease is primarily the result of lower yields on reinvested balances as investments matured throughout the year.

Provision (Benefit) for Income Taxes

Income tax benefit increased in fiscal 2022, as compared to fiscal year 2021, primarily due to a decrease in the proportion of profits generated in higher tax jurisdictions, an increase in the U.S. federal research tax credit as well as an increase in tax benefits from excess stock-based compensation deductions.

Income tax expense decreased in fiscal 2021, as compared to fiscal year 2020, primarily due to a decrease in the proportion of profits generated in higher tax jurisdictions, as well as an increase in the U.S. federal research tax credit, partially offset by an increase in non-deductible stock-based compensation.

Liquidity and Capital Resources

Cash Flows

The following table summarizes our cash flows for the periods indicated: